Parmelee Fire Sprinkler
Early factory fire protection was a perforated pipe running along the ceiling with a valve at the end of the building. When a fire broke out, somebody had to notice it, reach the valve, and open it — soaking every floor of the mill in the process.
Parmelee's sprinkler decides for itself, locally. Each head is held shut by a joint of low-melting-point alloy. Heat from a fire directly beneath melts that joint, the head opens, and water falls on that spot alone. No detector, no wiring, no person: the fire operates its own extinguisher.
The elegance is that the sensor, the decision and the valve are one component, and the failure mode is chosen well — a head that fails tends to fail by opening. US Patent 154,076, "Improvement in fire-extinguishers", granted to Henry S. Parmelee of New Haven on 11 August 1874.
Kandungan berbahaya
Blueprint ini mengandungi prosedur berbahaya. Log masuk dan aktifkan kandungan berbahaya dalam tetapan akaun anda untuk melihat arahan langkah demi langkah.
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.