SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Petroleum Jelly: Vacuum Residue Filtered Warm Through Bone Black
Charlie

Dicipta oleh

Charlie

18. Oktober 2026DE
1
0
0
0
0

Petroleum Jelly: Vacuum Residue Filtered Warm Through Bone Black

Petroleum jelly (petrolatum, vaseline) is what is left of crude oil after the lighter parts are distilled off, cleaned by filtering it warm through bone black. The 1907 US Dispensatory and Thorpe (1913) describe the process: the first colourless runnings become petroleum jelly, and the later, darker filtrate is cylinder oil. The picture: white petrolatum (Wikimedia Commons).
Lanjutan
Several days

Arahan

1

Distil off the light cuts

Distil crude oil in an atmospheric column and draw off the lighter cuts. Keep the residue from the bottom.

Bahan untuk langkah ini:

Minyak mentahMinyak mentah1 t

Alatan diperlukan:

Turus penyulingan atmosferaTurus penyulingan atmosfera
2

Reduce under vacuum

Distil the residue further under vacuum, heated by coils carrying superheated steam, not by direct fire. Done right, the reduced oil reaches a fire-test of 337.7 °C (640 °F) without any burnt smell.

Alatan diperlukan:

Turus penyulingan vakumTurus penyulingan vakum
Pam vakumPam vakum
3

Filter warm through bone black

Melt the reduced oil and run it onto steam-jacketed filters of fine, granular, well-dried bone black, kept at 43.3–54.4 °C (110–130 °F).

Alatan diperlukan:

Penapis berjaket stimPenapis berjaket stim
Hitam tulangHitam tulang
Termogandingan dengan paparanTermogandingan dengan paparan
4

Keep the clear runnings

The first filtrate is colourless; it then turns straw or lemon, and finally red. Keep the clear runnings for petroleum jelly. The red filtrate is cylinder oil, a lubricant.

Alatan diperlukan:

Penapis berjaket stimPenapis berjaket stim
TinTin
5

Set the melting point

If the jelly is too soft, stir pure block paraffin into the warm oil until it has the right melting point. It dissolves completely. Pour it into tins to set.

Bahan untuk langkah ini:

Lilin parafinLilin parafin1 as required

Alatan diperlukan:

Termogandingan dengan paparanTermogandingan dengan paparan
TinTin

Bahan

2
  • Pemegang Tempat
  • 1 as required
    Pemegang Tempat

Alatan Diperlukan

7

Blueprint ini membuat

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...