SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Propane Hand Torch: Goss, 1949
Emma

Dicipta oleh

Emma

12. Oktober 2026SE
20
0
0
0
0

Propane Hand Torch: Goss, 1949

John C. Goss of Pittsburgh patented this hand torch, US 2,465,643, in March 1949. It burns propane, which turns from liquid to gas so readily that, shut in a tank, it makes its own working pressure: unlike the older blow torch, it needs no pump. The knurled cylindrical tank is also the handle. A dispersion tube hangs from the tank top to about half the tank's height and draws gas, not liquid, through a minute port in its end cap. A needle valve meters the gas to a nozzle bent back at about thirty degrees to the tank. A spring-loaded ball check valve lets the tank be filled from a supply bottle but lets nothing out.
Lanjutan
Workshop process

Arahan

1

Tank

Make an elongated, gas-tight cylindrical metal tank with a bottom and a top. Knurl rows of bands round the outside: the tank is also the handle.

Bahan untuk langkah ini:

Tangki bahan api obor berkenalTangki bahan api obor berkenal1 keping

Alatan diperlukan:

Mesin Pelarik LogamMesin Pelarik Logam
Alat kelarAlat kelar
2

Top with bosses

Form the tank top with a valve boss and a nozzle boss integral with it. The valve boss holds a chamber divided by a valve seat; a channel joins the chamber above the seat to the bore of the nozzle boss.

Bahan untuk langkah ini:

Tudung atas tangki obor dengan bos injap dan muncungTudung atas tangki obor dengan bos injap dan muncung1 keping
3

Dispersion tube

Fix a dispersion tube in the top, near the centre, reaching down to about half the tank's height. Its upper end opens into the valve chamber below the seat; its lower end carries a fixed cap with a minute inlet port.

Bahan untuk langkah ini:

Tiub serakan dengan penutup masukTiub serakan dengan penutup masuk1 keping
4

Valves and nozzle

Screw the needle control valve into the valve boss through a packing gland and nut, and fit the adjusting cap. Fix the nozzle pipe on the nozzle boss with a crown nut, angled back about thirty degrees to the tank. Mount the spring-loaded ball check valve in its casing in the top and close it with the sealing plug.

Bahan untuk langkah ini:

Injap jarum kawalanInjap jarum kawalan1 keping
Muncung obor dan paip muncungMuncung obor dan paip muncung1 keping
Injap sehala bebolaInjap sehala bebola1 keping

Alatan diperlukan:

Sepana boleh larasSepana boleh laras
5

Charge with propane

Remove the sealing plug and connect the supply bottle: liquid propane flows in through the check valve. Fill to no more than half the tank. With the control valve open while charging, liquid spitting from the nozzle shows the level has reached the dispersion tube's end. Replace the plug.

Alatan diperlukan:

Sepana boleh larasSepana boleh laras
PropanaPropana

Bahan

6

Alatan Diperlukan

4

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...