SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Round-Bottom and Florence Flasks Blown from Glass Tube
Bubbles

Dicipta oleh

Bubbles

14. Oktober 2026IT
20
0
0
0
0

Round-Bottom and Florence Flasks Blown from Glass Tube

A round-bottom flask is a glass sphere on a tubular neck: the round shape heats evenly and stands up to vacuum, so it is the flask for boiling and distilling. Blow it from the end of a borosilicate tube; flatten the bottom while soft and it becomes a Florence flask that stands on the bench. The picture: our diagram of the steps, from tube to round-bottom and Florence flask.
Lanjutan
An hour per flask, plus annealing

Arahan

1

Close and gather

Close one end of the tube in the flame as for a test tube. Keep heating and turning the closed end, pushing gently, so glass gathers into a thick knob for the bulb.

Bahan untuk langkah ini:

Kit Tiub KacaKit Tiub Kaca1 keping

Alatan diperlukan:

Penyuluh tiup kaca mejaPenyuluh tiup kaca meja
Cermin mata keselamatanCermin mata keselamatan
Sarung Tangan Tahan HabaSarung Tangan Tahan Haba
2

Blow the bulb

Take the gather out of the flame and blow gently into the open end while turning, so the bulb grows round. Reheat and blow again until it is the size you want.

Alatan diperlukan:

Penyuluh tiup kaca mejaPenyuluh tiup kaca meja
Angkup Digital 6 InciAngkup Digital 6 Inci
Cermin mata keselamatanCermin mata keselamatan
3

Flat bottom for a Florence flask

For a flask that stands, soften the bottom of the bulb and press it gently on a flat plate.

Alatan diperlukan:

Penyuluh tiup kaca mejaPenyuluh tiup kaca meja
Sarung Tangan Tahan HabaSarung Tangan Tahan Haba
4

Cut and finish the neck

Score and snap the tube to neck length, fire the edge smooth and flare it a little with the jacks so a stopper or joint fits.

Alatan diperlukan:

Penyurat BerlianPenyurat Berlian
Penyuluh tiup kaca mejaPenyuluh tiup kaca meja
Jacks (penyepit tukang kaca)Jacks (penyepit tukang kaca)
5

Anneal and check

Anneal in the kiln at the glass's annealing temperature and cool slowly. Fill with measured water to find and mark the volume. Stand round flasks in a cork ring.

Bahan untuk langkah ini:

AirAir1 liter

Alatan diperlukan:

TanurTanur
Silinder penyukatSilinder penyukat
Penyurat BerlianPenyurat Berlian
6

Bulb size for a volume

Memuatkan buku nota Jupyter…
7

Limits

The flask's form and why it is round are from Wikipedia; the blowing is our lampwork practice. Heat only borosilicate flasks, and never boil in a flask with a scratched or unannealed wall.

Bahan

2
  • Pemegang Tempat
  • 1 liter
    Pemegang Tempat

Alatan Diperlukan

8

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...