Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Rubber Hose: Braided, Spirally Wrapped and Vulcanized in Long Lengths
Henry Cobb's wrapped hose (Revere Rubber, US 1,230,867, 1917). A rubber tube is forced through a ring die, braided over while held open by pressure, wrapped by machine with a helical strip of frictioned fabric overlapping half its width, covered in rubber and vulcanized. Wrapping by machine instead of rolling bias-cut fabric by hand lets the hose run 500 ft or more, and Cobb says it stands nearly twice the bursting pressure.
The patent gives no sizes, recipes or cure times. Couplings are not part of it: an air hose is this hose with couplings fitted. The picture: the patent's sheet 1.
Lanjutan
1 day
Arahan
1
1
Force the inner tube
Force the inner tube
Force vulcanizable rubber compound through the ring-shaped gap between the two parts of a tube die to make the inner tube (1).
Bahan untuk langkah ini:
Sebatian getah1 batchAlatan diperlukan:
Acuan penyemperitan tiub2
2
Braid over the tube
Braid over the tube
Run the tube through a braiding machine that lays crossing helical strands over it (2), coating the strands with rubber compound as they braid. Keep the tube under air pressure so it does not collapse. Ours: the air from a compressor. The braid may be left out, but it holds the hose to size.
Bahan untuk langkah ini:
Benang1 batchSebatian getah1 batchAlatan diperlukan:
Mesin tocang
Pemampat udara3
3
Cut the fabric along the warp
Cut the fabric along the warp
Cut frictioned fabric into a long strip lengthwise, along the warp threads; wound helically, both warp and weft then run round the hose as if cut on the bias.
Bahan untuk langkah ini:
Fabrik geseran getah1 gulungAlatan diperlukan:
Pisau utiliti4
4
Wrap the strip half over
Wrap the strip half over
Feed the braided tube through the wrapping machine, which winds the strip (3) round it under tension, each turn over half the last: two plies, the whole length without stopping. For four plies wind a second strip (5) over the first, in the same pass or a second.
Alatan diperlukan:
Mesin pembalut hos5
5
Plies from the overlap
Plies from the overlap
Memuatkan buku nota Jupyter…
6
6
Cover and vulcanize
Cover and vulcanize
Apply a layer of rubber compound (4) over the last winding for a smooth, protected outside. Vulcanize the hose for its whole length in a mould or otherwise.
Bahan untuk langkah ini:
Sebatian getah1 batchAlatan diperlukan:
Acuan pemvulkananBahan
3- 1 batchPemegang Tempat
- 1 batchPemegang Tempat
- 1 gulungPemegang Tempat
Alatan Diperlukan
6- Pemegang Tempat
- Pemegang Tempat
- 1 vendor sell this, none ship to you yetPemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.