Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Scraper: a Hand Scraper Forged from Octagon Steel (Holford, 1907)
A hand scraper takes paint and grease off boiler plate, cast iron or any other material and leaves a bright, smooth surface. Frederick Holford's 20th Century Toolsmith (1907) forges one from 5/8-inch octagon tool steel: the end is drawn perfectly flat, 1/8 inch thick, about 3 inches long and 1 inch wide, with the end left square so its corners do the cutting. It is hardened hard and no temper is drawn.
The overall length of the bar is not given; that is unknown here.
Source: F. J. Holford, The 20th Century Toolsmith and Steelworker (1907), pp. 176-177 and p. 21 (the hardening bath). Picture: his Fig. 107.
Pertengahan
An hour
Arahan
1
1
Read Holford
Read Holford
"A scraper for taking off paint, grease, etc., off boiler plate or any other material and leave a bright smooth surface, is chiefly made from octagon steel ... for an ordinary scraper 5/8 octagon will do."
2
2
Forge the blade flat
Forge the blade flat
Choose octagon steel to suit the width of scraper wanted; 5/8 inch does for an ordinary one. Forge the end perfectly flat, 1/8 inch thick, about 3 inches long and 1 inch wide, and leave the end perfectly square. The length of the bar left for a handle is not given (unknown).
Bahan untuk langkah ini:
Bar keluli alat segi lapan1 barAlatan diperlukan:
Relau Tempa
Andas
Tukul tukang besi
Penyepit tukang besi
Dimensi tidak diketahui3
3
Harden, no temper
Harden, no temper
Heat about 1 inch back from the scraping edges and quench in the hardening bath, then cool the whole tool. Holford's bath (p. 21) is clean water free from grease, best made a brine with as much salt as it will dissolve, large and cold. Draw no temper: the tool must be very hard.
Alatan diperlukan:
Relau TempaPenyepit tukang besi
Larutan garam tepu
Sarung Tangan Tahan Haba4
4
Grind the corners
Grind the corners
Grind the square end so its corners are very sharp: the corners are the scraping edges.
Alatan diperlukan:
Batu canai roda5
5
History and honest limits
History and honest limits
Holford says the scraper "will give excellent results if properly forged, hammered and hardened". The same hard, untempered scraper is the tool used to bring metal surfaces true by scraping off high spots.
The overall length of the bar is not given.
Bahan
1- Pemegang Tempat
Alatan Diperlukan
8- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.