Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Stirrer: Magnetic Stirrer, a Turning Horseshoe Magnet under a Free Magnet Rod (Rosinger, US 2,350,534, 1944)
The magnetic stirrer of the chemistry lab. A small motor in a box spins a horseshoe magnet just under the thin lid. A little magnet rod sealed in an inert shell lies loose in the flask on top and spins with it, stirring the liquid into a deep vortex with nothing poking through the neck, so the flask can stay closed, under pressure or vacuum.
Result: a stirrer for laboratory liquids, speed set by a rheostat.
Source: A. Rosinger, US 2,350,534 (1944). Unknown: sizes, the motor and the magnet alloys. Picture: the patent drawing.
Pertengahan
Unknown
Arahan
1
1
Build the box
Build the box
Make a box with a bottom, side walls and a removable top, all of non-magnetic material. Make the top as thin as you can. Not given: the material, sizes.
Bahan untuk langkah ini:
Bahan tidak diketahui1 non-magnetic boxAlatan diperlukan:
Dimensi tidak diketahui2
2
Mount the motor and magnet
Mount the motor and magnet
Fix an electric motor in the middle of the box with its shaft upright, held by bands round its housing whose arms are screwed to the side walls. Fix a strong horseshoe permanent magnet on the shaft, poles up, so its pole faces turn as close under the thin top as possible. Not given: the motor, the magnet alloy.
Bahan untuk langkah ini:
Motor elektrik1 keping
Logam tidak diketahui1 bands and arms
Magnet ladam1 kepingAlatan diperlukan:
Set pemutar skru3
3
Wire the speed control
Wire the speed control
Lead the motor wires out of the box through a regulating rheostat and a switch to a cord with a plug. The rheostat sets the motor speed, and so the stirring speed.
Bahan untuk langkah ini:
Reostat1 keping
Suis togol1 keping
Kord fleksibel berpalam1 kepingAlatan diperlukan:
Set pemutar skru4
4
Make the stirring rod
Make the stirring rod
Take a small round permanent magnet rod, shorter than the width of the flask's bottom, and seal it in a thin shell of an inert material (porcelain, glass, Bakelite or a suitable plastic) so it cannot affect the liquid. Where bare iron or steel would do no harm, the shell may be left off. Ours: a sealed glass tube for the shell.
Bahan untuk langkah ini:
Set magnet bar1 rod magnet
Tiub kaca1 shellAlatan diperlukan:
Penunu Bunsen5
5
Stir
Stir
Stand a non-magnetic flask or beaker of the liquid on the box and drop in the rod. Switch on and set the speed: the rod follows the turning magnet and whips the liquid into a deep vortex. Set the rod off-centre and it both spins and travels round the bottom, stirring faster still. The vessel can be closed, since no shaft goes in.
Alatan diperlukan:
Bikar KacaBahan
9- 1 non-magnetic boxPemegang Tempat
- 1 kepingPemegang Tempat
- 1 bands and armsPemegang Tempat
- 1 kepingPemegang Tempat
- 1 kepingPemegang Tempat
- Pemegang Tempat
- 1 kepingPemegang Tempat
- 1 rod magnetPemegang Tempat
- 1 shellPemegang Tempat
Alatan Diperlukan
4- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.