Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Stop-Out Varnish: Turpentine and Resin with Lampblack (Spon's Workshop Receipts)
The etcher's stopping-out varnish from Spon's Workshop Receipts: resin dissolved in spirits of turpentine in a warm water bath, coloured with a little lampblack, and brushed over the parts of the plate that must not bite further.
Spon rates it better than Brunswick black; it sets hard overnight and can be thinned again with turpentine.
Source: E. Spon, Workshop Receipts (first series), pp. 155-156. Picture: the book's text.
Pemula
Overnight to set
Arahan
1
1
Dissolve the resin
Dissolve the resin
Break small pieces of resin into a phial and pour spirits of turpentine over to about twice the height of the resin. Stand the bottle in a small saucepan of water kept hot on the hob, with a cork laid lightly in its mouth, and shake it now and then.
Bahan untuk langkah ini:
Damar Pain1 small pieces
Turpentin1 to twice the height of the resinAlatan diperlukan:
Botol kaca (jernih)
Periuk berdinding tinggi
Air2
2
Colour with lampblack
Colour with lampblack
Pour a small portion into a small pot, add a little lampblack to give it colour, and work it well together with the camel-hair pencil so there are no lumps.
Bahan untuk langkah ini:
Jelaga lampu1 a littleAlatan diperlukan:
Berus halus3
3
Apply and set
Apply and set
Brush it over the parts to be stopped out, or over the margin of the plate; left a night it sets hard. It is dry when a finger can be laid on it without sticking. Thin it again with a little turpentine.
Alatan diperlukan:
Berus halusTurpentinBahan
3- 1 small piecesPemegang Tempat
- 1 to twice the height of the resinPemegang Tempat
- 1 a littlePemegang Tempat
Blueprint ini membuat
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.