SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
MASA DEPAN HIJAU
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
WEARABLES
Building a Nyckelharpa — The Swedish Keyed Fiddle
Woody

Dicipta oleh

Woody

3. Julai 2026NO
0
0
0
0
0

Building a Nyckelharpa — The Swedish Keyed Fiddle

Build a nyckelharpa: a bowed Swedish fiddle played not with fingers on a fingerboard but with a row of wooden KEYS whose tangents press the string to each note. It also carries sympathetic strings that ring on their own. A serious maker build in the bowed string, the tangent keyboard and sympathetic resonance.
Pertengahan
Several hours over several sessions

Arahan

1

A fiddle with a keyboard

The nyckelharpa is a bowed Swedish fiddle, but instead of pressing the strings with your fingers you press wooden KEYS. Each key drives a little tangent against the string to make a note.
2

Build the soundbox

Build a long, hollow wooden body with a light soundboard on top. This box amplifies the bowed strings.

Bahan untuk langkah ini:

Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 keping
Dry Softwood BoardDry Softwood Board1 keping
PVA Wood GluePVA Wood Glue1 keping

Alatan diperlukan:

HacksawHacksaw
3

Fit the strings

Stretch a melody string and one or two drone strings along the top, over a bridge, tuned with pegs.

Bahan untuk langkah ini:

Steel Music Wire 0.032"Steel Music Wire 0.032"1 keping
Tuning PegsTuning Pegs4 keping

Alatan diperlukan:

AwlAwl
4

Add sympathetic strings

Under the melody string, run a set of thin strings you never touch — the SYMPATHETIC strings. Tuned to the scale, they ring on their own whenever their note is played, giving the halo of sound.

Bahan untuk langkah ini:

Steel Music Wire 0.032"Steel Music Wire 0.032"1 keping
5

Build the key-box

Build a box under the neck holding a row of sliding wooden keys, each carrying a small hardwood tangent.

Bahan untuk langkah ini:

Dowel RodDowel Rod1 keping

Alatan diperlukan:

Sloyd Carving KnifeSloyd Carving Knife
6

Set the tangents

Position each key's tangent so that pressing the key from below stops the melody string at the next note of the scale — a keyboard of frets you push up into the string.
7

Make the bow

String a short springy stick with horsehair to make a bow, and rub it with pine rosin.

Bahan untuk langkah ini:

Curved Branch (Bow)Curved Branch (Bow)1 keping
Bow Hair (Horsehair)Bow Hair (Horsehair)1 keping
8

Bow and key

Hold the harpa across your body on a strap, bow the strings with one hand, and press the keys with the other. The keys pick out the tune while the drones and sympathetic strings shimmer beneath.
9

Compendium — bowing through a keyboard

The nyckelharpa joins two ideas. First it is a bowed instrument: drawing a rosined bow across a string sets it into steady stick-slip vibration, the same Helmholtz motion as the erhu or violin, so the note sings on as long as you bow. Second, it is stopped by a KEYBOARD rather than by fingers: each key carries a tangent, a little hard ridge that pushes against the string to shorten its speaking length to a fixed note, exactly as a fret does — the same mechanism that fingers the melody on a hurdy-gurdy, but here you bow by hand instead of turning a wheel. What gives the nyckelharpa its glittering, cathedral-like tone is a third set of strings, the SYMPATHETIC strings, stretched under the melody string and never touched: each is tuned to a note of the scale, and whenever that note sounds on the bowed string, the matching sympathetic string is shaken into vibration by resonance and rings along on its own, wrapping every note in a soft halo — the same resonance trick used by the Indian sitar and sarangi. Played in Sweden since the Middle Ages and pictured on medieval church walls, the nyckelharpa is a cousin of the hurdy-gurdy (its keyed neighbour) and of the whole bowed-string family.

Bahan

8

Alatan Diperlukan

3

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...