SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
YourGrandma

Dicipta oleh

YourGrandma

30. September 2026IS
39
0
0
0
0

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring

A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace. James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws. This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
Pertengahan
About 4 hours

Arahan

1

The ring's screws

Memuatkan buku nota Jupyter…
2

A hinged squeezer before it

The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3

Read US 104,159

"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B." "This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4

Make the handles and set the bowl

**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B. **Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it. **Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle. **Press.** Screw a hardwood dome to the upper handle so it closes into the bowl. **Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.

Bahan untuk langkah ini:

TinTin1 keping
Kepingan besi putihKepingan besi putih1 keping
Pateri paip tanpa plumbumPateri paip tanpa plumbum1 keping
FluksFluks1 keping
Papan Kayu KerasPapan Kayu Keras1 keping
Blok Kayu KerasBlok Kayu Keras1 keping
Engsel daunEngsel daun1 keping
Skru kayuSkru kayu8 keping
LemonLemon2 keping

Alatan diperlukan:

Gunting kepingan logamGunting kepingan logam
PakuPaku
TukulTukul
Alat pematerianAlat pematerian
Gergaji TanganGergaji Tangan
Set pahat kayuSet pahat kayu
Gerudi Tanpa WayarGerudi Tanpa Wayar
Set Mata GerudiSet Mata Gerudi
Kikir kasarKikir kasar
Set pemutar skruSet pemutar skru
Pisau dapurPisau dapur
Gelas minumGelas minum
Sarung Tangan Kerja KulitSarung Tangan Kerja Kulit
5

A bowl that rocks, leaks or will not come out

Ring-set lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened. **Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.

Bahan

9
  • 1 keping
    Pemegang Tempat
  • Pemegang Tempat
  • Pemegang Tempat
  • 1 keping
    Pemegang Tempat
  • Pemegang Tempat
  • Pemegang Tempat
  • 1 keping
    Pemegang Tempat
  • 8 keping
    Pemegang Tempat
  • 2 keping
    Pemegang Tempat

Alatan Diperlukan

13

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...