SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI

Three-Strand Cotton Rope, Laid by Hand
Laid rope is three strands twisted together, each twist opposite the one inside it: the yarns one way, the strands the other, the rope the first way again. Each layer tries to untwist and is held by the next. Twist three strands of cotton twine hard, then let them lay themselves into rope.
The picture: a laid cotton rope, from the 1911 Encyclopaedia Britannica.
Pertengahan
Half a day
Arahan
1
1
Lay out the strands
Lay out the strands
Run three equal strands of several twines each from a post to three hooks, half as long again as the rope you want (step 5).
Bahan untuk langkah ini:
Tali Kapas60 mAlatan diperlukan:
Batang kayu lurus
Pengapit C
Pembaris
Gunting2
2
Twist each strand
Twist each strand
Hook one strand into the hand drill and twist it the same way as the twine was plied until it kinks when slackened. Clamp it, and do the other two the same.
Alatan diperlukan:
Gerimit tangan
Pengapit C3
3
Lay the rope
Lay the rope
Bring the three strand ends together and let go slowly from the far end: they twist round one another the opposite way. Guide the lay with a hand so it closes evenly.
Alatan diperlukan:
Pengapit C4
4
Whip the ends
Whip the ends
Bind each end tightly with a few turns of twine so it cannot unlay, and trim.
Bahan untuk langkah ini:
Tali Kapas1 mAlatan diperlukan:
Gunting5
5
Twine needed
Twine needed
Memuatkan buku nota Jupyter…
Bahan
1- 61 mPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.



