SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Two-Shaft Treadle Loom with a Split-Cane Reed
uncredited engraver (possibly Damé himself); Socec publishers (Wikimedia Commons) · Public domain
Woody

Dicipta oleh

Woody

14. Oktober 2026NO
7
0
0
0
0

Two-Shaft Treadle Loom with a Split-Cane Reed

On a treadle loom the feet open the shed, leaving both hands for the shuttle. A wooden frame carries the warp beam and the cloth beam; two shafts carry the heddles that lift alternate warp threads; treadles tied to the shafts work them; a batten with a reed, once made of split cane, spaces the warp and beats the weft in. The picture: a peasant handloom from Romania, old engraving.
Lanjutan
Two weeks

Arahan

1

Frame

Saw two side frames of beech, each two posts joined top and bottom by mortised rails, and join them with cross rails front and back. Glue and peg every joint square.

Bahan untuk langkah ini:

Kayu beechKayu beech6 keping
Pasak kayu kerasPasak kayu keras16 keping
Gam kulit haiwanGam kulit haiwan100 g

Alatan diperlukan:

Gergaji TanganGergaji Tangan
Gergaji belakangGergaji belakang
Set pahatSet pahat
Tukul KayuTukul Kayu
Gerimit tanganGerimit tangan
Sesiku tetapSesiku tetap
Periuk tanak dua lapisPeriuk tanak dua lapis
2

Beams and ratchets

Shave two round beams from shafts for the warp beam at the back and the cloth beam at the front, with round journals resting in notches in the side frames. Cut a toothed wooden ratchet wheel on one end of each and a pawl on the frame to hold the tension.

Bahan untuk langkah ini:

Batang kayu lurusBatang kayu lurus2 keping
Kayu beechKayu beech1 keping

Alatan diperlukan:

Pisau TarikPisau Tarik
Ketam lengkungKetam lengkung
Gergaji TanganGergaji Tangan
Set pahatSet pahat
3

Shafts and heddles

Make two shafts, each a pair of light bars. Tie cotton string heddles between the bars, each with a small eye in the middle, all the same length (step 6). Hang both shafts from cords over a roller on top of the frame, so one rises as the other sinks.

Bahan untuk langkah ini:

Batang kayu lurusBatang kayu lurus5 keping
Benang KapasBenang Kapas200 m
TaliTali6 meter

Alatan diperlukan:

Pisau SloydPisau Sloyd
GuntingGunting
PembarisPembaris
4

Reed and batten

Shave split cane into thin, even dents. Bind them upright between two pairs of wooden ribs with cotton thread wound between each dent, spacing them evenly. Mount the reed in a batten hung from the top of the frame so it swings to beat.

Bahan untuk langkah ini:

Buluh belahBuluh belah30 m
Benang KapasBenang Kapas100 m
Kayu beechKayu beech1 keping

Alatan diperlukan:

Pisau SloydPisau Sloyd
Gergaji TanganGergaji Tangan
Gerimit tanganGerimit tangan
5

Treadles

Hinge two treadle bars to a rod at the back of the floor frame. Tie each to the bottom of one shaft, so pressing a treadle pulls its shaft down and lifts the other.

Bahan untuk langkah ini:

Kayu beechKayu beech1 keping
Batang kayu lurusBatang kayu lurus1 keping
TaliTali4 meter

Alatan diperlukan:

Gergaji TanganGergaji Tangan
Gerimit tanganGerimit tangan
Pisau SloydPisau Sloyd
6

Reed and heddles

Memuatkan buku nota Jupyter…

Bahan

7

Alatan Diperlukan

12

Blueprint ini membuat

Thumbnail
Pemegang tempat

Kek tenun berpedal

Free

68
0
1

Blueprint berkaitan

Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip

Warping a Treadle Loom — Measuring, Beaming, and Threading Warp for Broadcloth

Warping a Treadle Loom — Measuring, Beaming, and Threading Warp for Broadcloth

oleh TexFO

Tekstil & Kulit

33
0
0
0
0
0
Backstrap Loom Set: End Bars, Shed Rod, Heddle Rod and Sword

Backstrap Loom Set: End Bars, Shed Rod, Heddle Rod and Sword

oleh WoodyNO

Kerja Kayu

6
0
0
0
0
0
Rigid Heddle Loom: a Beech Frame, Two Rollers and a Slotted Heddle

Rigid Heddle Loom: a Beech Frame, Two Rollers and a Slotted Heddle

oleh TexFO

Tekstil & Kulit

19
0
0
0
0
0

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...