Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Uncapping Tray: McIntyre's Uncapping Box (A B C of Bee Culture, 1910)
Woody

Dicipta oleh

Woody

4. November 2026NO
4
0
0
1
0

Uncapping Tray: McIntyre's Uncapping Box (A B C of Bee Culture, 1910)

A big wooden uncapping box from a California honey producer: 6 ft long, tin-lined, with a screen on cross strips to catch the cappings and a tin pipe at one end where the honey drains out, and an iron pivot on a cross piece to spin each comb while uncapping. Its length lets the cappings be forked to the far end to drain for 4 or 5 days instead of piling under the knife. Source: J. F. McIntyre in The A B C and X Y Z of Bee Culture (1910), pp. 183-184. Picture: the book's section and view.
Pemula
Unknown

Arahan

1

Build the box

Make a box 2 ft wide, 2 ft deep and 6 ft long outside of 7/8 in lumber dressed both sides, with the bottom 2 in lower in the middle than at the sides.

Bahan untuk langkah ini:

PapanPapan1 7/8 in lumber

Alatan diperlukan:

Gergaji TanganGergaji Tangan
TukulTukul
Paku BesiPaku Besi
2

Line it and fit the pipe

Line the bottom with tin to keep it from leaking, and fit a tin pipe at one end for the honey to run out.

Bahan untuk langkah ini:

Kepingan besi putihKepingan besi putih1 keping

Alatan diperlukan:

Gunting kepingan logamGunting kepingan logam
TukulTukul
3

Lay the screen

Lay eleven pieces of wood 1 x 1 x 22 in across the bottom about 6 in apart and lay the screen on them, leaving room below for the honey to run to the pipe end.

Bahan untuk langkah ini:

PapanPapan11 1 x 1 x 22 in
Kain ayak dawai tenunanKain ayak dawai tenunan1 keping

Alatan diperlukan:

Gergaji TanganGergaji Tangan
4

Narrow the top and fit the pivot

Nail two pieces 7/8 x 3 x 72 in on the top edges, one each side, to narrow the top to the inside length of a Langstroth hive. Fix one piece 7/8 x 3 x 22 1/4 in across the top about 14 in from one end, with an iron pivot sticking up through it 1 1/2 in high to rest the combs on.

Bahan untuk langkah ini:

PapanPapan3 two 7/8 x 3 x 72 in, one 7/8 x 3 x 22 1/4 in
Bar besiBar besi1 pivot 1 1/2 in high
Paku BesiPaku Besi1 keping

Alatan diperlukan:

Gergaji TanganGergaji Tangan
TukulTukul
5

Set it up and use it

Stand the box with its bottom 7 in from the floor so the honey can run into a strainer below; the top is then about 32 in high (make it shallower, or stand on a plank, for a shorter person). Set one end of a comb on the pivot, uncap one side, whirl it round and uncap the other, then stand the comb in the end of the box.

Alatan diperlukan:

TukulTukul

Bahan

5
  • 3 two 7/8 x 3 x 72 in, one 7/8 x 3 x 22 1/4 in
    Pemegang Tempat
  • Pemegang Tempat
  • Pemegang Tempat
  • 1 pivot 1 1/2 in high
    Pemegang Tempat
  • 1 keping
    Pemegang Tempat

Alatan Diperlukan

4

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...