SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Welded Steel Tube from Coil (ERW)
Most everyday steel tube is electric-resistance welded (ERW). Steel strip slit from a coil is bent cold through a row of shaped rolls until its edges meet as a round tube; a current passed across the edges heats them, and rolls squeeze them together into a weld with no filler metal. The bead squeezed out is trimmed off, sizing rolls bring the tube to its final diameter, and a flying saw cuts it to length. Low-frequency current was used from the 1920s until 1970, when high-frequency welding replaced it because it gives a better seam.
Lanjutan
Continuous (industrial)
Arahan
1
1
Slit the coil
Slit the coil
The steel coil is slit into strip as wide as the tube's circumference.
Bahan untuk langkah ini:
Gegelung keluli1000 kg2
2
Roll-form
Roll-form
The strip passes a series of shaped rolls that curl it, step by step, into an open round tube.
Alatan diperlukan:
Mesin pembentuk tiub bergelek3
3
Weld the seam
Weld the seam
High-frequency current, induced by a coil or fed by contacts, heats the two edges and squeeze rolls press them together into a solid seam.
Alatan diperlukan:
Mesin kimpal tiub frekuensi tinggi4
4
Trim, size and cut
Trim, size and cut
A cutting tool right after the welder planes off the outside bead; the tube cools, sizing rolls set the diameter, and a flying cut-off cuts it to length while it moves.
Alatan diperlukan:
Mesin pembentuk tiub bergelek5
5
Check
Check
Diameter and wall thickness are measured; the seam is tested.
Alatan diperlukan:
Angkup Digital 6 InciBahan
1- 1000 kgPemegang Tempat
Alatan Diperlukan
3- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.