Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Willow Stakes: Soaked and Pointed Osiers (Hasluck, 1903)
Woody

Dicipta oleh

Woody

4. November 2026NO
5
0
0
0
0

Willow Stakes: Soaked and Pointed Osiers (Hasluck, 1903)

Basket stakes as the basket-maker prepares them: osiers dried for months, soaked in a trough until pliable, cut to length at about half the thickness of the bottom sticks, and pointed with two slanting cuts so they drive into the woven bottom. Fresh green osiers are never used. Source: P. N. Hasluck, Basket Work of All Kinds (1903), pp. 12-13 and 31. Picture: the book's page on damping osiers.
Pemula
Months of drying, then several days soaking

Arahan

1

Season the osiers

Never use fresh-cut green osiers: leave them several months until thoroughly shrunk and dry.

Bahan untuk langkah ini:

Ranting willowRanting willow1 keping

Alatan diperlukan:

PisauPisau
2

Soak until workable

Lay the brown osiers in a trough of water for several days, until the water has penetrated them and they are pliable; handle a rod or two now and then to judge. If water hangs on them when you start, stand them on their top ends a few minutes to drain.

Alatan diperlukan:

PalungPalung
AirAir
3

Cut and point the stakes

Choose rods about half the thickness of the basket's bottom sticks and cut them just long enough to finish in the border. Point each with the shop knife: two slanting cuts about 2 1/2 in long, one down the back and one at the side.

Alatan diperlukan:

PisauPisau

Bahan

1

Alatan Diperlukan

3
  • Pemegang Tempat
  • Pemegang Tempat
  • Pemegang Tempat

CC0 Domain Awam

Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.

Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.

Perbincangan

(0)

Log masuk untuk menyertai perbincangan

Memuatkan komen...