Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Woven Glass Fibre Cloth, Style 112: Plain Weave of E-glass Yarn
Thin glass cloth is the skeleton of resin laminates. This is Type I (commercial style 112) of the US standard MIL-C-9084C (1970): a plain weave of E-glass yarn ECD 450-1/2 both ways, at least 39 by 38 yarns per inch, 0.0030–0.0050 in thick, 38 in wide. Woven, it is greige cloth; its finish must make it bond to the resin it goes into (epoxy for Class 2).
The picture: two plain-woven glass fabrics, 220 and 550 g/m², heavier than style 112 (Cjp24, Wikimedia Commons, public domain).
Pertengahan
2 days
Arahan
1
1
Wind the warp
Wind the warp
Warp with yarn ECD 450-1/2, at least 39 ends per inch across a width of 38 in including the selvages (about 1,480 ends; ours, from 39 × 38). Ours: a warping frame and floor loom.
Bahan untuk langkah ini:
Benang Kaca E1 as requiredAlatan diperlukan:
Rangka pengani
Alat tenun berpedal
Sarung tangan getah2
2
Weave plain, 38 picks per inch
Weave plain, 38 picks per inch
Weave plain (over one, under one) with the same yarn as filling, at least 38 picks per inch (15 per cm). Ours: a boat shuttle.
Alatan diperlukan:
Alat tenun berpedal
Torak perahu
Penggulung gelendongSarung tangan getah3
3
Check and finish the cloth
Check and finish the cloth
The cloth must be 0.0030–0.0050 in (0.08–0.13 mm) thick, weigh 1.94–2.18 oz per square yard (66–74 g/m²) and be 38 in wide (−0.25/+0.50 in). Its finish may be just a cleaning that removes processing oils and binders, if the cloth then bonds well to its resin, or a cleaning followed by, for example, a resin-coupling agent. The standard gives no method; the finished cloth must pass its laminate tests (Class 2 for epoxy).
Alatan diperlukan:
Neraca dua piringBahan
1- 1 as requiredPemegang Tempat
Alatan Diperlukan
6- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
- Pemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.