SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI

Wool Cloth Woven in Plain Weave on a Rigid Heddle Loom
Plain weave is the most basic weave: each weft thread goes over one warp thread and under the next. Woven from undyed wool yarn, the cloth comes off the loom loose and soft, still oily and unshrunk; fulling cleans and thickens it afterwards.
The picture: plain weave seen close up.
Pemula
A few days
Arahan
1
1
Warp the loom
Warp the loom
Measure the warp (step 5), tie it to the front roller, and thread one end through each slot and each hole of the heddle. Wind it on the back roller under even tension.
Bahan untuk langkah ini:
Benang loseng320 mAlatan diperlukan:
Kek tenun sikat tegar
Pembaris
Pengapit C
Gunting2
2
Weave
Weave
Lift the heddle, pass the shuttle through, lower the heddle and pass it back, beating each pick in lightly with the heddle. Lay the weft in at a slant so the edges do not draw in.
Bahan untuk langkah ini:
Benang pakan265 mAlatan diperlukan:
Kek tenun sikat tegar
Torak tenun3
3
Advance and keep going
Advance and keep going
Wind the woven cloth onto the front roller as you go, keeping the beat even so the cloth has the same number of picks per cm all along.
Alatan diperlukan:
Kek tenun sikat tegar
Pembaris4
4
Cut off
Cut off
Weave to the end of the warp, cut the cloth off, and knot the warp ends in groups so the weft cannot unravel. It is now loom-state cloth, ready for fulling.
Alatan diperlukan:
Gunting5
5
Yarn for the cloth
Yarn for the cloth
Memuatkan buku nota Jupyter…
Bahan
2- 320 mPemegang Tempat
- 265 mPemegang Tempat
Blueprint ini membuat
Blueprint berkaitan
Blueprint ini berkongsi pengetahuan — teknik, bahan atau prinsip
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.




