IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Capillary Glass Tubes Drawn Out from Tube
Bubbles

Ṣẹ́dá nipasẹ̀

Bubbles

14. Oṣù Kẹwà 2026IT
25
0
0
0
0

Capillary Glass Tubes Drawn Out from Tube

A capillary is glass tube drawn out thin in the flame: heat a band while turning it, take it out and pull, and the tube stretches into a fine tube with a hair-thin bore. Chemists drew tubes out over a lamp this way, as Fownes's manual (1856) shows. Faster and longer pulls give finer bores. The picture: glass capillary tubes on a cutting mat.
Àárín
An hour

Ìlànà

1

Heat a band

Hold a length of glass tube in both hands and turn it steadily in the torch flame, heating a band about 2 cm wide until it sags soft.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Àkójọpọ̀ Páìpù GíláàsìÀkójọpọ̀ Páìpù Gíláàsì1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ọ̀gọ̀ ìfẹ́ dígí orí tábìlìỌ̀gọ̀ ìfẹ́ dígí orí tábìlì
Gíláàsì ààbòGíláàsì ààbò
Ìbọ̀wọ́ Tí Ń Fara Da OoruÌbọ̀wọ́ Tí Ń Fara Da Ooru
2

Out of the flame, pull

Take it out of the flame and pull your hands apart in one smooth movement, keeping it straight. A gentle pull gives a thicker capillary, a fast long one a finer bore.

Àwọn irinṣẹ́ tí a nílò:

Gíláàsì ààbòGíláàsì ààbò
Ìbọ̀wọ́ Tí Ń Fara Da OoruÌbọ̀wọ́ Tí Ń Fara Da Ooru
3

Cut to length

When cold, score the capillary with a file and snap it into lengths. For melting-point tubes, seal one end by touching it to the edge of the flame.

Àwọn irinṣẹ́ tí a nílò:

Àwọn Ìfá (Ìfá Ọwọ́)Àwọn Ìfá (Ìfá Ọwọ́)
Ìdíwọ̀nÌdíwọ̀n
Ọ̀gọ̀ ìfẹ́ dígí orí tábìlìỌ̀gọ̀ ìfẹ́ dígí orí tábìlì
Gíláàsì ààbòGíláàsì ààbò
4

Check and store

Measure the outside with the caliper, sort by size and keep them in a closed jar so no dust gets in the bores.

Àwọn irinṣẹ́ tí a nílò:

Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6
Ìgò GílásìÌgò Gílásì
5

How far to pull

Ń ṣí ìwé Jupyter…

Àwọn ohun-èlò

1

Àwọn irinṣẹ́ tó nílò

7

Ìtọ́nisọ́nà yìí ń ṣe

Blueprint tó jọra

Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...