IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Extruded Polystyrene Foam: Butylene-Blown Logs 20 Inches Across (McIntire, Dow 1948, Ex. 4)
Extruded polystyrene foam blown with a butylene gas fraction. 300 lb of polystyrene and about 130 lb of the fraction stand two days at 110 °C under 265 psi. Opened again and again, the tower let out foam logs 20 inches across and 20 feet long, weighing only 0.8 lb per cubic foot. Unknown: a source for the butylene fraction, linked to an unknown head.
Source: O. R. McIntire (Dow), US 2,450,436 (1948), Example 4. Picture: the patent's drawing.
Ilọsíwájú
3 days
Ìlànà
1
1
Charge the tower with polystyrene
Charge the tower with polystyrene
Charge a high-pressure tower with 300 lb of granular polystyrene.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Pólístáírín300 lbsÀwọn irinṣẹ́ tí a nílò:
Ìkòkò ìṣesí ìfúnpá
Òǹwọ̀n ìdọ́gba
Ìbọ̀wọ́ rọ́bà2
2
Add the butylene fraction
Add the butylene fraction
Add about 130 lb of a cracked-oil gas fraction that is about 87 % normal butylenes, with some butanes and butadiene, under pressure. Unknown: a source for this fraction. Flammable gas: no flames, strong ventilation.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ìpín gáàsì ìfọ́ epo bútílínì130 lbsÀwọn irinṣẹ́ tí a nílò:
Àgbá gáàsì tí a fi ìfúnpá kúnÌkòkò ìṣesí ìfúnpá
Gílásì Ààbò Fún Ìfọ́n Kẹ́míkà3
3
Heat two days at 110 °C
Heat two days at 110 °C
Close the tower and heat it at 110 °C for two days. The gauge pressure stays at 265 psi.
Àwọn irinṣẹ́ tí a nílò:
Ìkòkò ìṣesí ìfúnpá
Ẹ̀rọ Ìwọ̀n Ooru Yàrá Ìwádìí4
4
Let out logs through a 3.25 inch outlet
Let out logs through a 3.25 inch outlet
Open and close the 3.25 inch outlet near the bottom again and again. Each portion swells into a foam log 20 inches across and about 20 feet long, with fine, even, closed cells, weighing 0.8 lb per cubic foot.
Àwọn irinṣẹ́ tí a nílò:
Ìkòkò ìṣesí ìfúnpáGílásì Ààbò Fún Ìfọ́n Kẹ́míkàÌbọ̀wọ́ rọ́bà5
5
Saw into boards
Saw into boards
When the foam has set, saw it lengthwise into slabs (ours: a woodworking saw).
Àwọn irinṣẹ́ tí a nílò:
Ayùn gbẹ́nàgbẹ́nàÌbọ̀wọ́ rọ́bàÀwọn ohun-èlò
2- 300 lbsÀyè
- 130 lbsÀyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.