IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Fine-Tip Tweezers: One Steel Strip Bent and Spring-Tempered
Forge

Ṣẹ́dá nipasẹ̀

Forge

14. Oṣù Kẹwà 2026NO
30
0
0
0
0

Fine-Tip Tweezers: One Steel Strip Bent and Spring-Tempered

Tweezers are two springy arms joined at one end: pressed, the tips close; let go, the spring opens them. They go back to predynastic Egypt. Make them from one strip of tool steel bent in half, temper it to a spring, and file the tips to fine needle points that meet exactly. The picture: Roman tweezers, one strip bent at a loop, with a sliding ring.
Àárín
Half a day

Ìlànà

1

Draw the strip

Draw tool steel to a strip about 8 mm wide, 0.8 mm thick and 21 cm long (our size), tapering both ends.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Ọ̀pá pẹlẹbẹ irin irinṣẹ́Ọ̀pá pẹlẹbẹ irin irinṣẹ́1 ẹyọ
ÈédúÈédú1 as required

Àwọn irinṣẹ́ tí a nílò:

Ìléru alágbẹ̀dẹÌléru alágbẹ̀dẹ
Ìdí Alágbẹ̀dẹÌdí Alágbẹ̀dẹ
Òòlù olórí ìtẹ̀ ìpakàÒòlù olórí ìtẹ̀ ìpakà
Ẹmú alágbẹ̀dẹẸmú alágbẹ̀dẹ
2

Bend it in half

Anneal, then bend the strip in half round a small rod so the arms spring apart with the tips about 6 mm open. Square the arms in the vise.

Àwọn irinṣẹ́ tí a nílò:

Ìdìmú TábìlìÌdìmú Tábìlì
Òòlù olórí ìtẹ̀ ìpakàÒòlù olórí ìtẹ̀ ìpakà
Ìléru alágbẹ̀dẹÌléru alágbẹ̀dẹ
3

Shape the tips

File the ends to long, fine points with the needle files, and dress the inner faces so the tips meet along the last few millimetres. Check under the loupe.

Àwọn irinṣẹ́ tí a nílò:

Àkójọ Ìfá KékeréÀkójọ Ìfá Kékeré
Ìfá IrinÌfá Irin
Lúpù ÌgbégaLúpù Ìgbéga
4

Harden and spring-temper

Heat to cherry red and quench in oil, polish, then temper to blue so the arms spring back (our temper).

Àwọn irinṣẹ́ tí a nílò:

Ìléru alágbẹ̀dẹÌléru alágbẹ̀dẹ
Àpótí ìtutùÀpótí ìtutù
Òróró gígéÒróró gígé
Ẹmú alágbẹ̀dẹẸmú alágbẹ̀dẹ
5

Finish the points

Hone the tips lightly on the stone and check that they close evenly without crossing.

Àwọn irinṣẹ́ tí a nílò:

Òkúta ìpọ́n grit 1000Òkúta ìpọ́n grit 1000
Lúpù ÌgbégaLúpù Ìgbéga
6

Closing force

Ń ṣí ìwé Jupyter…

Àwọn ohun-èlò

2

Àwọn irinṣẹ́ tó nílò

11

Ìtọ́nisọ́nà yìí ń ṣe

Blueprint tó jọra

Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...