IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Fire Pit: a Shallow Pit Ringed with Stones
A fire pit contains a fire and keeps it from spreading. The simplest is a hole dug in the ground; a ring of stones makes a fire ring. Place it at least three metres from any building, clear the ground round it, dig a shallow pit and ring it with dry stones; stones can burst when heated, so choose them with care.
The picture: a stone-ringed fire pit beside a forest trail.
Olùbẹ̀rẹ̀
An hour or two
Ìlànà
1
1
Choose the place
Choose the place
Pick level, open ground at least three metres from buildings, with nothing that can catch overhead. Cut and lift the turf and clear a wide circle down to bare soil.
Àwọn irinṣẹ́ tí a nílò:
Ọ̀kọ́ ìwalẹ̀ (ṣọ́ọ̀bù)2
2
Dig the pit
Dig the pit
Dig a shallow pit about 80 cm across and 15 cm deep (our size) and pile the soil aside.
Àwọn irinṣẹ́ tí a nílò:
Ọ̀kọ́ ìwalẹ̀ (ṣọ́ọ̀bù)
Ọkọ́3
3
Ring it with stones
Ring it with stones
Set a ring of stones round the edge, bedded into the soil so they do not roll. Use stones that have been lying dry; stones from streams or wet ground hold water and are more likely to burst when heated (our caution).
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àwọn òkúta15 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ọkọ́4
4
Keep water by
Keep water by
Keep a bucket of water beside it whenever it is lit, and put the fire out fully with water and stirring before leaving it.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Omi10 lítàÀwọn irinṣẹ́ tí a nílò:
Bàkẹ́tì irin5
5
Stones for the ring
Stones for the ring
Ń ṣí ìwé Jupyter…
Ìtọ́nisọ́nà yìí ń ṣe
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.