IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Gold Sheet: Fine Gold Cast Flat, Rolled and Annealed, Gee
Forge

Ṣẹ́dá nipasẹ̀

Forge

18. Oṣù Kẹwà 2026NO
22
0
0
0
0

Gold Sheet: Fine Gold Cast Flat, Rolled and Annealed, Gee

Fine gold stretches further under the rolls than any other metal (Gee, The Goldsmith's Handbook). Cast it as a broad, thin bar, file the edges clean, and roll it, closing the rolls a little each pass. When it hardens, anneal it and roll on, down to 0.005 inch. The picture: a piece of ancient gold sheet (Portable Antiquities Scheme, Harriet Louth, Wikimedia Commons, CC BY-SA 4.0).
Àárín
1 day

Ìlànà

1

Cast a broad, thin bar

Melt the fine gold in a crucible and pour it into the ingot mould as a broad, thin bar: the bigger the surface, the less waste at the edges.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

WúràWúrà31 g

Àwọn irinṣẹ́ tí a nílò:

Ìkòkò ìyọ́Ìkòkò ìyọ́
Ọ̀pá Iná PùróféènìỌ̀pá Iná Pùróféènì
Ẹmú Ìkòkò Ìyọ́Ẹmú Ìkòkò Ìyọ́
Àwòṣe fún ìṣù irinÀwòṣe fún ìṣù irin
2

Weigh and file

Weigh the bar to see what was lost in melting. File the edges and corners clean: loose bits would be lost in the rolling.

Àwọn irinṣẹ́ tí a nílò:

Òǹwọ̀n ìdọ́gbaÒǹwọ̀n ìdọ́gba
Àkójọ Ìfá KékeréÀkójọ Ìfá Kékeré
3

Roll, closing a little each pass

Pass the bar through the rolls again and again, closing them a little each time.

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ ìtẹ̀ irinẸ̀rọ ìtẹ̀ irin
4

Anneal when it hardens

When the gold turns hard, anneal it: lay it on an iron sheet in the kiln and heat it to soften it.

Àwọn irinṣẹ́ tí a nílò:

Ìléru ÌsunÌléru Ìsun
Pẹpẹ irin (tí a lù)Pẹpẹ irin (tí a lù)
Ẹmú Ìkòkò Ìyọ́Ẹmú Ìkòkò Ìyọ́
5

Roll down to 0.005 inch

Roll and anneal in turn until the sheet measures 0.005 inch, then weigh it again.

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ ìtẹ̀ irinẸ̀rọ ìtẹ̀ irin
MáíkírómítàMáíkírómítà
Òǹwọ̀n ìdọ́gbaÒǹwọ̀n ìdọ́gba

Àwọn ohun-èlò

1
  • 31 g
    Àyè

Àwọn irinṣẹ́ tó nílò

10

Ìtọ́nisọ́nà yìí ń ṣe

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...