IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Gummed Paper Labels: Paper Backed with Gum Arabic, Moistened to Stick
Before self-adhesive labels, labels and stamps were gummed: the back is coated with a water-soluble gum such as gum arabic, left to dry, and moistened when the label is put on. Coat a sheet of paper, dry it flat, and cut it into labels.
The picture: our diagram, coating to cut labels.
Olùbẹ̀rẹ̀
An afternoon, plus drying
Ìlànà
1
1
Make the gum
Make the gum
Soak gum arabic in about twice its weight of warm water until dissolved, warm it gently in a double boiler and strain out bits.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Òjé Arabic50 g
Omi0.1 lítàÀwọn irinṣẹ́ tí a nílò:
Ìdìpọ̀ abọ́ ìdàpọ̀
Ìkòkò méjì onímí omi
Ohun Ìsẹ́ Kékeré2
2
Coat the back
Coat the back
Brush a thin, even coat on the back of the paper sheet. Let it dry and give it a second thin coat.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Bébà2 ewéÀwọn irinṣẹ́ tí a nílò:
Búrọ́ọ̀ṣì gọ́mù
Àká Ìgbẹ3
3
Dry flat
Dry flat
When the gum is dry to the touch, put the sheet between flat boards under a light weight so it does not curl.
Àwọn irinṣẹ́ tí a nílò:
Pátákó igi pẹlẹbẹ ìtẹ̀ (méjì)
Àwọn ìwúwo ìfúnpọ̀4
4
Cut the labels
Cut the labels
Write or print on the front, then cut the sheet into labels. To fix one, moisten the gummed side and press it on.
Àwọn irinṣẹ́ tí a nílò:
Ọ̀bẹ Iṣẹ́ Ọwọ́
Ìdíwọ̀nÀwọn irinṣẹ́ tó nílò
9- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.