IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Incense Sticks: Charcoal and Gum Paste Rolled onto Bamboo Cores
A cored incense stick is a thin bamboo stick coated in a thick layer of combustible paste that smoulders away with the core. Charcoal dust is the fuel, a little saltpetre keeps it burning and a gum binds it. Roll the paste onto bamboo sticks, trim them and dry them slowly so they do not warp.
The picture: our diagram, coated sticks, one smouldering.
Olùbẹ̀rẹ̀
An afternoon, then drying
Ìlànà
1
1
Split the cores
Split the cores
Split bamboo into thin, straight sticks of even length.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀pá òpe1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ọ̀bẹ
Pákó Ìgéǹkan Oúnjẹ2
2
Make the paste
Make the paste
Grind charcoal dust finer with a little saltpetre and sieve it. Dissolve gum arabic in a little water and knead it into the dust to a stiff, smooth dough. Wear a mask.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Èédú - lílọ̀ fínní80 g
Potassium nitrate (iyọ̀ ìbọn)5 g
Òjé Arabic8 gÀwọn irinṣẹ́ tí a nílò:
Odó àti Ọmọ Odó
Ohun Ìsẹ́ Kékeré
Abọ́
Omi
Ìbòjú Eruku3
3
Roll
Roll
Roll a little paste into a thin coil, lay a stick beside it and roll the two together on the board until the stick is centred and coated, leaving a bare handle.
Àwọn irinṣẹ́ tí a nílò:
Pákó Ìgéǹkan Oúnjẹ4
4
Dry slowly
Dry slowly
Trim the ends and lay the sticks on a tray in the shade, turning them now and then, until hard and dry.
Àwọn irinṣẹ́ tí a nílò:
Àwo pẹlẹbẹ fún gbígbẹỌ̀bẹ5
5
Paste for your sticks
Paste for your sticks
Ń ṣí ìwé Jupyter…
Àwọn ohun-èlò
4- 1 ẹyọÀyè
- Àyè
- 8 gÀyè
Ìtọ́nisọ́nà yìí ń ṣe
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.