IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Laminated Spruce Blank: Planed Spruce Boards Glued Grain-Parallel and Clamped
A laminated blank is several thin boards glued face to face with their grain running the same way: small pieces make one large member, and defects in one layer matter less. Saw and dry spruce boards, plane them smooth, glue them up and clamp them tight.
The picture: our diagram, spruce layers glued and clamped.
Àárín
Weeks of drying, then two days
Ìlànà
1
1
Saw and dry
Saw and dry
Saw the spruce log into boards about 12 mm thick, seal the ends and air-dry them under stickers until the meter reads 8 to 14 % moisture.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ìtì igi spruce (Picea abies)1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn ẹni méjì
Ayùn gígé bá ìhà igi
Ohun ìdí orí-pákó (ìdí paraffin)
Ọ̀pá igi ìtò (àlàfo ìgbẹ́)
Ohun ìwọ̀n ọ̀rinrin2
2
Plane
Plane
Plane both faces of each board flat and smooth for gluing; check with a straightedge.
Àwọn irinṣẹ́ tí a nílò:
Ohun èlò ìfárí igi (pìlánì)
Ìdìmú Tábìlì
Etí tààrà
Okùn Ìdíwọ̀n3
3
Glue up
Glue up
Warm the glue in a double boiler, brush it on the faces, and stack the boards with the grain all running lengthwise.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Lẹ̀mọ́ ẹranko0.3 kgÀwọn irinṣẹ́ tí a nílò:
Ìkòkò méjì onímí omi
Búrọ́ọ̀ṣì gọ́mù
Omi4
4
Clamp
Clamp
Clamp the stack tight every 15 cm or so and leave it a day. Plane the faces and edges true.
Àwọn irinṣẹ́ tí a nílò:
Ìdìmú oní-ọ̀páOhun èlò ìfárí igi (pìlánì)5
5
Layers for your blank
Layers for your blank
Ń ṣí ìwé Jupyter…
Àwọn ohun-èlò
2- Àyè
- 0.3 kgÀyè
Àwọn irinṣẹ́ tó nílò
13- Àyè
- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.