IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Mud Plaster: Clay, Sand and Straw Trodden Together and Laid On
Mud plaster is clay to bind, sand for bulk and straw to hold it together and stop it cracking as it dries. Mix them with water by hand or by treading, lay it on the wall, and let it dry; add a second coat if needed.
The picture: our diagram, a wall with its straw-filled mud coat.
Olùbẹ̀rẹ̀
A day, then drying
Ìlànà
1
1
Soak the clay
Soak the clay
Break the clay up in the trough, cover it with water and leave it to soften overnight.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Amọ̀100 kgÀwọn irinṣẹ́ tí a nílò:
Ìgbá àdàpọ̀
Ọ̀kọ́ ìwalẹ̀ (ṣọ́ọ̀bù)
Bàkẹ́ẹ̀tì
Omi2
2
Mix
Mix
Add sand and work it in with the hoe, then add chopped straw by handfuls and tread or knead it until the straw is spread through and the mix is stiff but sticky.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Iyanrìn100 kg
Koríko Gbígbẹ Gígé5 kgÀwọn irinṣẹ́ tí a nílò:
Ọkọ́Ìgbá àdàpọ̀3
3
Lay on
Lay on
Wet the wall, throw or press the plaster on about 2 cm thick and smooth it. Let it dry, then add a thinner second coat over any cracks.
Àwọn irinṣẹ́ tí a nílò:
Ohun èlò amọ̀-bíríkì (tùróòlù)Bàkẹ́ẹ̀tìOmi4
4
Plaster for your wall
Plaster for your wall
Ń ṣí ìwé Jupyter…
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.