IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down
Emma

Ṣẹ́dá nipasẹ̀

Emma

6. Oṣù Kẹwà 2026SE
21
0
0
0
0

Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down

O'Neil used the rush of the cream itself to draw air into it. John O'Neil of Xenia, Ohio, received US 7,531, dated 30 July 1850, for an atmospheric churn: a box divided by a movable partition with its lower edge perforated; an air tube down the partition with a bowl at its top, in the lid, holding a spring-closed hinged valve; a horizontal tube at its foot and branch tubes through the partition's lower edge, which "serve the double purpose of breaking the cream as it passes through and of communicating the current of atmosphere to the opposite apartment." Two plungers on a rocking lever, one cut to pass over the air tube, work oppositely. This rung estimates the suction, then prints the partition with its tubes, the valve bowl and the plungers, builds the box and lever, and makes butter.
Ilọsíwájú
About 5 hours, plus printing

Ìlànà

1

The suction

Ń ṣí ìwé Jupyter…
2

Two plungers forcing cream through holes before it

The embedded blueprint throws cream between three chambers. O'Neil uses two, and lets the cream's rush through branch tubes draw air down an air tube.
3

Read US 7,531

"The depression of one, and the same time the elevation of the other causes the cream to be violently rushed through the horizontal tubes d, d, and the holes in the partition from one apartment to the other alternately. The passage of the cream through the tubes d, d, causes a suction of the atmosphere down the pipe b, through the horizontal part of the tube c, to d, d, and thence to the body of cream in each apartment."
4

Print the parts

Print the partition with its air tube, foot tube and branches in one piece (/uploads/blueprints/partition-air-tube-plunger-churn-partition-and-tubes.stl), with supports. Blow through the tube's top to check air comes out of both branches. Print the valve bowl (/uploads/blueprints/partition-air-tube-plunger-churn-valve-bowl.stl), one plunger (/uploads/blueprints/partition-air-tube-plunger-churn-plunger.stl) and one notched plunger (/uploads/blueprints/partition-air-tube-plunger-churn-notched-plunger.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Okùn PETGOkùn PETG1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)
5

Box, partition and valve

Take a food-safe box about 220 × 120 × 180 mm and fit two plywood strips inside the long sides at the middle as grooves, so the partition slides in and out. Drill the lid over the air tube's top and seat the bowl's spigot onto the tube through it. Hinge a small leather flap on the bowl's seat with a light spring, as his, so air passes down but cream cannot rise.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Àgọ́ ìtọ́jú ti ìpele oúnjẹÀgọ́ ìtọ́jú ti ìpele oúnjẹ1 ẹyọ
Àwo igi tí a lẹ̀ pọ̀Àwo igi tí a lẹ̀ pọ̀1 ẹyọ
Tẹ́ẹ́rẹ́ awọTẹ́ẹ́rẹ́ awọ1 ẹyọ
Ìdílẹ̀ SilikoniÌdílẹ̀ Silikoni1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ayùn KópìngìAyùn Kópìngì
Ẹ̀rọ Ìlùkòkò AláìlókùnẸ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí ÌlùkòkòÀkójọ Orí Ìlùkòkò
6

Plungers and lever

Glue a 12 mm hardwood dowel rod in each plunger, the notched one on the side of the air tube. Screw a pine standard to each side of the box at the middle, pass a dowel axle through them and a pine lever, and join each rod to the lever on a loose screw.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Àwọn dowel igi líleÀwọn dowel igi líle1 ẹyọ
Pákó igi pinePákó igi pine1 ẹyọ
Skurú ẹ̀rọSkurú ẹ̀rọ1 ẹyọ
Nọ́ọ̀tì Onígun Mẹ́fàNọ́ọ̀tì Onígun Mẹ́fà1 ẹyọ
Ìdìpọ̀ IgiÌdìpọ̀ Igi1 ẹyọ
Ìsúrù igi #8 x 1"Ìsúrù igi #8 x 1"1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ayùn Ọwọ́Ayùn Ọwọ́
Ẹ̀rọ Ìlùkòkò AláìlókùnẸ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí ÌlùkòkòÀkójọ Orí Ìlùkòkò
Ìṣù àwọn ohun ìyí skurúÌṣù àwọn ohun ìyí skurú
7

The patent drawing

US 7,531 drawing sheet, public domain (expired patent).
Ìgbésẹ̀ 7 - Image 1
8

Rock and make butter

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Rock the lever briskly; bubbles should come from the branch tubes. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Ọ̀rá wàrà tó nípọnỌ̀rá wàrà tó nípọn1500 ml
Iyọ̀ Òkun RúkèrúdòIyọ̀ Òkun Rúkèrúdò1 ẹyọ
OmiOmi1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inúẸ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inú
Aago ÌdúróAago Ìdúró
Òṣùwọ̀n Díjítà Ilé ÌdánáÒṣùwọ̀n Díjítà Ilé Ìdáná
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yáÀwo ìdàpọ̀ ńlá ti irin tí kò ń yá
9

No air, cream in the bowl

Partition air-tube churn troubleshooting.

Flow

Loading...
10

History and honest limits

**John O'Neil** of Xenia, Greene County, Ohio, received US 7,531, dated 30 July 1850. His plungers had parts of two sides cut away, leaving about 1½ inches at each corner, "for the purpose of gathering the butter above the dasher." He claimed the construction of the air tubes in combination with the plungers and partition. **Honest limits.** Printed parts and a food-safe box stand in for his; the notebook's pressure drop is a rough estimate. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

Àwọn ohun-èlò

14

Àwọn irinṣẹ́ tó nílò

10

Ìtọ́nisọ́nà yìí ń ṣe

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...