IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀

Compacted Clay Lining: Clay Puddled with Water and Trodden in Layers
Puddle clay is clay chopped and worked with water until plastic, then laid in layers and trodden down into a watertight skin; it lined canals, reservoirs and tanning pits. Lay it in the bottom of an evaporation pan and keep it wet: dried out, it no longer holds water.
The picture: our diagram, a pan lined with layers of puddled clay.
Olùbẹ̀rẹ̀
A day or two
Ìlànà
1
1
Chop and wet
Chop and wet
Dig clay, chop it small with the spade, and work it with water until it is plastic.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Amọ̀1000 kgÀwọn irinṣẹ́ tí a nílò:
Ọ̀kọ́ ìwalẹ̀ (ṣọ́ọ̀bù)
Bàkẹ́ẹ̀tì
Omi2
2
Lay and tread
Lay and tread
Spread a layer about 5 cm thick over the pan bottom and tread it down hard all over.
Àwọn irinṣẹ́ tí a nílò:
Ọ̀kọ́ ìwalẹ̀ (ṣọ́ọ̀bù)3
3
Build up
Build up
Wet the surface and lay the next layer the same way, until the lining is about 15 cm thick. Fill the pan with water soon and never let the lining dry out.
Àwọn irinṣẹ́ tí a nílò:
Ọ̀kọ́ ìwalẹ̀ (ṣọ́ọ̀bù)
Bàkẹ́ẹ̀tì
Omi4
4
Clay for your pan
Clay for your pan
Ń ṣí ìwé Jupyter…
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.


