IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Riven Hardwood Handle Stock
Tool handles take shock along their length, so handle makers split them from straight logs of tough woods such as ash and hickory: a split follows the grain, and a handle whose fibres run end to end does not snap where sawn grain runs out. Rive the blanks green, shave them roughly to size, and let them dry before final shaping.
Olùbẹ̀rẹ̀
Half a day, plus months drying
Ìlànà
1
1
Cut a billet
Cut a billet
Saw a straight, knot-free ash or hickory log to the handle length plus 5 cm.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Igi líle (oaki, mápù, bíìṣì)1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn ẹni méjì
Okùn Ìdíwọ̀n2
2
Split it
Split it
Split the billet in half with the splitting axe, then into quarters and eighths with the froe and mallet, until each blank is a little larger than the handle.
Àwọn irinṣẹ́ tí a nílò:
Àáké ìlàlà
Froe (ọ̀bẹ ìpín)
Òòlù Igi
Gíláàsì ààbò3
3
Shave to rough size
Shave to rough size
Clamp each blank in the shaving horse and remove the bark and the pith edge with the drawknife, following the grain.
Àwọn irinṣẹ́ tí a nílò:
Ìjókòó ìgbẹ́
Ọ̀bẹ Ìfàsẹ́yìn4
4
Seal and dry
Seal and dry
Seal the ends and dry the blanks indoors, spaced apart, until the moisture meter reads close to the room's level.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ohun ìdí orí-pákó (ìdí paraffin)0.1 lítàÀwọn irinṣẹ́ tí a nílò:
Ohun ìwọ̀n ọ̀rinrin5
5
Final shaping
Final shaping
When dry, true the blanks with the spokeshave and store them ready for handles.
Àwọn irinṣẹ́ tí a nílò:
Ayùn onídìmú méjìÌjókòó ìgbẹ́Àwọn ohun-èlò
2- Àyè
- 0.1 lítàÀyè
Àwọn irinṣẹ́ tó nílò
10- 1 vendor sell this, none ship to you yetÀyè
- Àyè
- Àyè
- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.