IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Rocking Twin-Dasher Lever Churn: One Lever Rocks the Box and Works Two Dashers Through a Perforated Wall
Millie

Ṣẹ́dá nipasẹ̀

Millie

7. Oṣù Kẹwà 2026NL
33
0
0
0
0

Rocking Twin-Dasher Lever Churn: One Lever Rocks the Box and Works Two Dashers Through a Perforated Wall

A. C. Stiles of South Bloomfield, Ohio, received US 3,764, dated 27 September 1844, for a rocking churn: an oblong box on rockers, split by a partition with holes, with a dasher on each side worked by arms on shafts across the ends, and one upright lever that rocks the box and works the dashers together. This rung prints the partition, dashers and arms, builds the box and makes butter.
Ilọsíwájú
About 6 hours, plus printing

Ìlànà

1

One lever, three motions

Ń ṣí ìwé Jupyter…
2

Two dashers from one lever, before it

Mitchell worked two dashers from one lever; Stiles adds rockers and a perforated partition between them.
3

Read US 3,764

"The machine is operated by moving the upright lever l, to and fro, which rocks the box, while at the same time it works the dashers up and down, thus throwing the cream through the partition d, till the butter is made."
4

Print the parts

Print the partition (/uploads/blueprints/rocking-twin-dasher-lever-churn-partition.stl), two dashers (/uploads/blueprints/rocking-twin-dasher-lever-churn-dasher.stl), two dasher arms (/uploads/blueprints/rocking-twin-dasher-lever-churn-dasher-arm.stl) and two lower arms (/uploads/blueprints/rocking-twin-dasher-lever-churn-lower-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Okùn PETGOkùn PETG1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)
5

Box on rockers

Build a pine box about 260 × 120 × 150 mm with a close-fitting lid, sealed inside. Glue the partition across its middle and screw two curved pine rockers lengthwise underneath. Drill the lid for the two dasher handles.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Pákó igi pinePákó igi pine1 ẹyọ
Ìdìpọ̀ IgiÌdìpọ̀ Igi1 ẹyọ
Ìdílẹ̀ SilikoniÌdílẹ̀ Silikoni1 ẹyọ
Ìsúrù igi #8 x 1"Ìsúrù igi #8 x 1"1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ayùn Ọwọ́Ayùn Ọwọ́
Ayùn KópìngìAyùn Kópìngì
Ẹ̀rọ Ìlùkòkò AláìlókùnẸ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí ÌlùkòkòÀkójọ Orí Ìlùkòkò
Àwọn clampÀwọn clamp
6

Shafts, arms and lever

Set a 10 mm square shaft across each end on two studs, 60 mm above the lid. Fit a dasher arm on each, pointing inward and pinned to its dasher's handle, and a lower arm on each outside the box. Join the lower arms with a pine bar, and pivot an upright pine lever on a block near the box's foot, pinned to the bar's middle.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Àwọn dowel igi líleÀwọn dowel igi líle1 ẹyọ
Pákó igi pinePákó igi pine1 ẹyọ
Ọ̀pá Róbótó Irin Rírọ̀Ọ̀pá Róbótó Irin Rírọ̀1 ẹyọ
Skurú ẹ̀rọSkurú ẹ̀rọ1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ayùn Ọwọ́Ayùn Ọwọ́
Ẹ̀rọ Ìlùkòkò AláìlókùnẸ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí ÌlùkòkòÀkójọ Orí Ìlùkòkò
Ìṣù àwọn ohun ìyí skurúÌṣù àwọn ohun ìyí skurú
7

The patent drawing

US 3,764 drawing sheet, public domain (expired patent).
Ìgbésẹ̀ 7 - Image 1
8

Rock and churn

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Work the lever to and fro: the box rocks and the dashers rise and fall in turn. Keep fingers clear of the arms and the rockers. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Ọ̀rá wàrà tó nípọnỌ̀rá wàrà tó nípọn1500 ml
Iyọ̀ Òkun RúkèrúdòIyọ̀ Òkun Rúkèrúdò1 ẹyọ
OmiOmi1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inúẸ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inú
Aago ÌdúróAago Ìdúró
Òṣùwọ̀n Díjítà Ilé ÌdánáÒṣùwọ̀n Díjítà Ilé Ìdáná
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yáÀwo ìdàpọ̀ ńlá ti irin tí kò ń yá
9

Troubleshooting

Rocking twin-dasher churn troubleshooting.

Flow

Loading...
10

History and honest limits

**A. C. Stiles** of South Bloomfield, Pickaway County, Ohio, US 3,764, 27 September 1844. He claimed the combination of the rockers and dashers in the double-chambered churn. His drawing gives no sizes; ours are ours. FDM prints hold food in their layer lines, so wash well and replace when worn.

Àwọn ohun-èlò

11

Àwọn irinṣẹ́ tó nílò

11

Ìtọ́nisọ́nà yìí ń ṣe

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...