IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Self-Adhesive Labels: Printed, Kiss-Cut and Stripped
A self-adhesive label is a laminate: the face material, a pressure-sensitive adhesive (usually acrylic, sometimes rubber or hot-melt) and a release liner, often coated with crosslinkable silicone, that protects the adhesive. The labels are printed, then kiss-cut on a rotary die, often in line with printing: the blade cuts through the face and adhesive and stops at the liner. The waste matrix around the labels is peeled off against a roll and rewound, leaving the labels on the liner ready for dispensers.
Ilọsíwájú
Factory process
Ìlànà
1
1
Print the label design on the face of the label stock.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ohun èlò àmì-ọjà alálẹ̀mọ́ ìtẹ̀1 as requiredÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìtẹ̀wé àmì-ọjà2
2
Kiss-cut
Kiss-cut
Run the web through the rotary die so it cuts through the face and adhesive and stops at the liner.
Àwọn irinṣẹ́ tí a nílò:
Àwòṣe ìgé ìdajì oníyípo3
3
Strip the matrix
Strip the matrix
Peel the waste matrix off against an idle roll and rewind it; rewind the labels on their liner.
Àwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìgé àti ìtúnkáÀwọn ohun-èlò
1- 1 as requiredÀyè
Àwọn irinṣẹ́ tó nílò
3Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.