IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Shellac Sanding Sealer: a Thin One-Pound Cut in Alcohol
Thinned shellac is sold as sanding sealer: a first coat that soaks into bare wood so the finish coats are not drunk up, and that stops resin bleeding through. Dissolve about 120 g of flakes in a litre of alcohol, a one-pound cut, strain it and keep it closed; it lasts about a year.
The picture: pine board with coats of shellac.
Olùbẹ̀rẹ̀
A day
Ìlànà
1
1
Weigh and crush
Weigh and crush
Weigh 120 g of shellac flakes for each litre (step 4) and crush them roughly so they dissolve faster.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ẹ̀ka sẹ́làkì60 gÀwọn irinṣẹ́ tí a nílò:
Òǹwọ̀n ìdọ́gba
Odó àti Ọmọ Odó2
2
Dissolve
Dissolve
Measure the alcohol into a jar, add the flakes, close it and shake it now and then for a day until they have dissolved.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ethanol - ìpele ilé-ìwádìí, 95 %0.5 lítàÀwọn irinṣẹ́ tí a nílò:
Òpó ìwọ̀n
Ìgò Gílásì3
3
Strain and bottle
Strain and bottle
Strain through cheesecloth into a clean bottle and stopper it. Brush on thin; sand lightly when dry.
Àwọn irinṣẹ́ tí a nílò:
Aṣọ wàrà-dídì
Kọ́nfù Gílásì Onípọ̀n
Ìgò dígí (tí ó mọ́)4
4
The cut
The cut
Ń ṣí ìwé Jupyter…
Àwọn ohun-èlò
2- 60 gÀyè
- 0.5 lítàÀyè
Àwọn irinṣẹ́ tó nílò
7- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.