IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Spiral-Mouth Gatherer Churn: A Slotted Cylinder Swallows the Butter, Geared Dashes Churn Below
Moses Byard of Milan, Indiana, received US 18,384, dated 13 October 1857, for a hollow cylindrical "gatherer" on the churn's shaft, with a spiral mouth in one side and narrow slots round it; a cog wheel on the shaft drives pinions carrying dashes. Turning, the gatherer takes the butter in through its mouth while the buttermilk escapes through the slots.
This rung prints the gatherer, head, wheel and pinions, builds the churn and makes butter.
Àárín
About 4 hours, plus printing
Ìlànà
1
1
Wheel and pinions
Wheel and pinions
Ń ṣí ìwé Jupyter…
2
2
A churn that also gathers, before it
A churn that also gathers, before it
The Cowleses gather by turning both beater sets together; Byard by a slotted cylinder that swallows the butter.
3
3
Read US 18,384
Read US 18,384
"As soon as the butter is churned, it is collected by the revolutions of the 'gatherer' B, into its interior through the spiral opening a; and the buttermilk that is separated from it is allowed to escape through the openings b, b."
4
4
Print the parts
Print the parts
Print the gatherer (/uploads/blueprints/spiral-mouth-gatherer-churn-gatherer.stl), its removable head (/uploads/blueprints/spiral-mouth-gatherer-churn-head.stl), the cog wheel (/uploads/blueprints/spiral-mouth-gatherer-churn-cog-wheel.stl) and three pinions (/uploads/blueprints/spiral-mouth-gatherer-churn-pinion.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn PETG1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)5
5
Shafts and gatherer
Shafts and gatherer
Run a 10 mm square hardwood shaft through a square food-grade container about 220 mm across, the gatherer and its head on it, the cog wheel fixed to the gatherer's end. Below it run three more 10 mm square shafts, each with a pinion meshing the wheel and a hardwood lath fixed along it as the dash.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àgọ́ ìtọ́jú ti ìpele oúnjẹ1 ẹyọ
Àwọn dowel igi líle1 ẹyọ
Ìdìpọ̀ Igi1 ẹyọ
Ìdílẹ̀ Silikoni1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Ọwọ́
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí Ìlùkòkò6
6
Crank
Crank
Seal the shafts where they pass the walls with food-safe silicone and glue a pine crank arm and handle on the main shaft.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Pákó igi pine1 ẹyọÀwọn dowel igi líle1 ẹyọÌdìpọ̀ Igi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Ọwọ́Ẹ̀rọ Ìlùkòkò Aláìlókùn7
7
The build in 3D
The build in 3D
FreeCAD model of this build: the box cut away to show the gatherer on its shaft, the cog wheel at its end and the three pinions and dash shafts below.
8
8
Churn, then gather
Churn, then gather
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Crank steadily; time until the butter comes. Crank on slowly so the gatherer takes the butter in; lift it out and slide off its head to empty it. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀rá wàrà tó nípọn2000 ml
Iyọ̀ Òkun Rúkèrúdò1 ẹyọ
Omi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inú
Aago Ìdúró
Òṣùwọ̀n Díjítà Ilé Ìdáná
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yá9
9
Troubleshooting
Troubleshooting
Spiral-mouth gatherer troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Moses Byard** of Milan, Ripley County, Indiana, US 18,384, 13 October 1857, signed 28 July 1857. He made the slots long and narrow, running round the cylinder, "to keep them from being filled or clogged with the butter." He claimed the cylindrical vessel with a spiral mouth and slots. A container and printed parts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn.
Àwọn ohun-èlò
9- 1 ẹyọÀyè
- Àyè
- 1 ẹyọÀyè
- 2 ẹyọÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 2000 mlÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
Àwọn irinṣẹ́ tó nílò
8- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
Àwọn fáìlì àpẹrẹ
1Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
Counter-Turning Curved Beater Churn: Two Beater Sets Turn Opposite Ways, Then Together to Gather
láti ọwọ́ Millie
OÚNJẸ ÀTI OHUN MÍMU
27
0
0
0
0
0
Diamond-Breaker Scroll Dasher Churn: A Wheel in Rising Sections Throws the Cream Up and Out
láti ọwọ́ Spindle
Iṣẹ́ Igi
19
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
láti ọwọ́ TheChef
IṢẸ́ ỌWỌ́
49
0
0
0
0
0
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.