IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Spring Steel Strip and Wire, Hardened and Tempered
Forge

Ṣẹ́dá nipasẹ̀

Forge

11. Oṣù Kẹwà 2026NO
22
0
0
0
0

Spring Steel Strip and Wire, Hardened and Tempered

A spring must bend and come back. Mild steel bends and stays bent; high-carbon steel, hardened and then tempered to a blue colour, springs back. The strip or wire is shaped soft, heated until a magnet no longer sticks to it, quenched in warm oil to harden it, then tempered: cleaned bright and heated gently until the colour runs to blue. It starts from high-carbon crucible steel. Wire is drawn while the steel is still annealed.
Ilọsíwájú
A day

Ìlànà

1

Forge strip

Forge crucible steel at a yellow heat into strip, smoothing it with the flatter; never work it below red. Cut it to length while hot.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Irin líle tí a yọ́ nínú ìkòkòIrin líle tí a yọ́ nínú ìkòkò1 kg
ÈédúÈédú10 kg

Àwọn irinṣẹ́ tí a nílò:

Ìléru alágbẹ̀dẹÌléru alágbẹ̀dẹ
Ìdí Alágbẹ̀dẹÌdí Alágbẹ̀dẹ
Òòlù alágbẹ̀dẹÒòlù alágbẹ̀dẹ
Ohun èlò ìpẹ́rẹ́Ohun èlò ìpẹ́rẹ́
Ẹmú alágbẹ̀dẹẸmú alágbẹ̀dẹ
Aṣọ Ìdílé AwọAṣọ Ìdílé Awọ
Ìbọ̀wọ́ wẹ́lídìnÌbọ̀wọ́ wẹ́lídìn
Gíláàsì ààbòGíláàsì ààbò
2

Anneal

Heat to a dull red and bury it in dry wood ash to cool slowly overnight.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Eérú Igi LíleEérú Igi Líle2 kg

Àwọn irinṣẹ́ tí a nílò:

Bàkẹ́tì irinBàkẹ́tì irin
3

Draw wire

For wire, forge a rod, anneal it, and draw it through the drawplate with wax, annealing after every hole. Coil or bend the springs now, while it is soft.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Ìdí OyinÌdí Oyin10 g

Àwọn irinṣẹ́ tí a nílò:

Àwo ìfàokùn irinÀwo ìfàokùn irin
Ẹmú ìfàgùnẸmú ìfàgùn
Ìdìmú TábìlìÌdìmú Tábìlì
4

Harden

Heat the part evenly until a magnet no longer sticks, then plunge it into a lidded bucket of warm rapeseed oil and stir it. Keep the lid at hand for flare-ups.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Òróró canolaÒróró canola5 lítà

Àwọn irinṣẹ́ tí a nílò:

Ìléru alágbẹ̀dẹÌléru alágbẹ̀dẹ
ÒòfàÒòfà
Garawa irin pẹ̀lú ìbòGarawa irin pẹ̀lú ìbò
Ẹmú alágbẹ̀dẹẸmú alágbẹ̀dẹ
Ìbọ̀wọ́ wẹ́lídìnÌbọ̀wọ́ wẹ́lídìn
5

Clean bright

Sand a stripe bright on the hardened steel so you can see the temper colours.

Àwọn irinṣẹ́ tí a nílò:

Bébà ìpọ́nBébà ìpọ́n
6

Temper to blue

Heat it gently and evenly with the torch on fire bricks, or on a hot plate of steel, and watch the colours run straw, bronze, purple, blue. Stop at an even blue and let it cool.

Àwọn irinṣẹ́ tí a nílò:

Ọ̀pá Iná PùróféènìỌ̀pá Iná Pùróféènì
Bíríkì aládùúró-ináBíríkì aládùúró-iná
Ẹmú alágbẹ̀dẹẸmú alágbẹ̀dẹ
7

Test

Clamp one end in the vise and bend the free end a little: it must spring back straight.

Àwọn irinṣẹ́ tí a nílò:

Ìdìmú TábìlìÌdìmú Tábìlì
Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6
8

Troubleshooting

Spring tempering troubleshooting.

Flow

Loading...

Àwọn ohun-èlò

5

Àwọn irinṣẹ́ tó nílò

18

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...