Ìfọwọ́sowọ́pọ̀
IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Stop-Out Varnish: Turpentine and Resin with Lampblack (Spon's Workshop Receipts)
Charlie

Ṣẹ́dá nipasẹ̀

Charlie

4. Oṣù Kọkànlá 2026DE
4
0
0
0
0

Stop-Out Varnish: Turpentine and Resin with Lampblack (Spon's Workshop Receipts)

The etcher's stopping-out varnish from Spon's Workshop Receipts: resin dissolved in spirits of turpentine in a warm water bath, coloured with a little lampblack, and brushed over the parts of the plate that must not bite further. Spon rates it better than Brunswick black; it sets hard overnight and can be thinned again with turpentine. Source: E. Spon, Workshop Receipts (first series), pp. 155-156. Picture: the book's text.
Olùbẹ̀rẹ̀
Overnight to set

Ìlànà

1

Dissolve the resin

Break small pieces of resin into a phial and pour spirits of turpentine over to about twice the height of the resin. Stand the bottle in a small saucepan of water kept hot on the hob, with a cork laid lightly in its mouth, and shake it now and then.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Òjé Igi PáínìÒjé Igi Páínì1 small pieces
Tọ́pẹ́ńtáìnìTọ́pẹ́ńtáìnì1 to twice the height of the resin

Àwọn irinṣẹ́ tí a nílò:

Ìgò dígí (tí ó mọ́)Ìgò dígí (tí ó mọ́)
Ìkòkò olódi gígaÌkòkò olódi gíga
OmiOmi
2

Colour with lampblack

Pour a small portion into a small pot, add a little lampblack to give it colour, and work it well together with the camel-hair pencil so there are no lumps.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Èédú àtùpàÈédú àtùpà1 a little

Àwọn irinṣẹ́ tí a nílò:

Àwọn ìfọ̀wọ́ kékeréÀwọn ìfọ̀wọ́ kékeré
3

Apply and set

Brush it over the parts to be stopped out, or over the margin of the plate; left a night it sets hard. It is dry when a finger can be laid on it without sticking. Thin it again with a little turpentine.

Àwọn irinṣẹ́ tí a nílò:

Àwọn ìfọ̀wọ́ kékeréÀwọn ìfọ̀wọ́ kékeré
Tọ́pẹ́ńtáìnìTọ́pẹ́ńtáìnì

Àwọn ohun-èlò

3

Àwọn irinṣẹ́ tó nílò

5

Ìtọ́nisọ́nà yìí ń ṣe

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...