IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
The Button Corkscrew: A Helix That Grips and a Disc That Stops It
Youblob (drawn diagram, draw_corkscrew.py) · CC0
YourGrandma

Ṣẹ́dá nipasẹ̀

YourGrandma

27. Oṣù Kẹsàn 2026IS
2
0
0
0
0

The Button Corkscrew: A Helix That Grips and a Disc That Stops It

A cork is squeezed into a bottle neck so hard that pulling it out by a simple worm takes a strong arm — and a worm driven too far pierces the cork and pushes crumbs into the wine. Samuel Henshall, an English clergyman, took out British patent No. 2061 on 24 August 1795 for a corkscrew with a button: a concave disc fixed between the worm and the shank. The button stops the worm once it is deep enough, and turning on past that point twists the whole cork in the neck, breaking its hold on the glass before it is pulled. Matthew Boulton's works in Birmingham made it. This rung works out the worm's turns and grip and the force a pull needs, and makes and tests a button corkscrew.
Olùbẹ̀rẹ̀
About 2 hours

Ìlànà

1

Worm pitch, grip and pulling force

Ń ṣí ìwé Jupyter…
2

The helix underneath it

A corkscrew worm is a helix with nothing inside it. The embedded blueprint shows the helix as a ramp wrapped round a cylinder.
3

Make a worm and a button

Wind 2 mm spring steel wire round a 6 mm rod held in a vice, five turns at an 8 mm pitch — set the pitch by winding over a spacer strip. Grind the free end to a point on the outside of the helix so it follows the helix, not the centre. Leave a straight tail as the shank. For the button, drill a 20 mm steel washer to fit the shank and file its underside slightly concave with abrasive paper wrapped round a rod. Slide it down to where the worm starts and solder it in place. Fit a wooden handle across the top of the shank.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Okùn irin kámánìOkùn irin kámánì1 ẹyọ
Wáṣà PẹrẹsẹWáṣà Pẹrẹsẹ1 ẹyọ
Àwọn dowel igi líleÀwọn dowel igi líle1 ẹyọ
Wẹ́là tìnì-lédìWẹ́là tìnì-lédì1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ìdìmú TábìlìÌdìmú Tábìlì
Ẹ̀rọ Ìlùkòkò AláìlókùnẸ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí ÌlùkòkòÀkójọ Orí Ìlùkòkò
Àkójọpọ̀ bébà ìpọ́nÀkójọpọ̀ bébà ìpọ́n
Irin ìsúdìIrin ìsúdì
Ìbọ̀wọ́ Iṣẹ́ AwọÌbọ̀wọ́ Iṣẹ́ Awọ
Gílásì Ààbò Tí Ó Mọ́Gílásì Ààbò Tí Ó Mọ́
4

Measure the pull, with and without the twist

Recork several empty wine bottles with new corks of the same kind, using a hand corker, and let them stand a day. On the first, drive the worm in until the button touches, stop, and pull straight up with a spring scale hooked to the handle: read the peak force. On the next, drive it in until the button touches, then turn two more turns so the cork rotates in the neck, and pull again. Compare the peak forces. Compare also with a commercial corkscrew.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Àwọn kọ́ọ̀kìÀwọn kọ́ọ̀kì6 ẹyọ
Ìdìpọ̀ ìdídí ìgò wáìnìÌdìpọ̀ ìdídí ìgò wáìnì1 ẹyọ
Amúkòrò ÌgòAmúkòrò Ìgò1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ẹ̀rọ Ìwọ̀n Agbára (Òṣùwọ̀n Ìsúnkì)Ẹ̀rọ Ìwọ̀n Agbára (Òṣùwọ̀n Ìsúnkì)
5

A cork that will not come out cleanly

Cork removal problems.

Flow

Loading...
6

History and honest limits

**Samuel Henshall** was granted **British patent No. 2061** on 24 August 1795 — the first patent for a corkscrew. Matthew Boulton made Henshall's corkscrews at Soho, Birmingham, marked "Obstando Promoves". Later designs added threads, levers and wings to take the effort out of the pull. **Honest limits.** The cork pressure and friction in the notebook are illustrative; measure your own pulls. The patent itself is not in the patent databases used for this programme; its details here come from museum and patent-office sources.

Àwọn ohun-èlò

7

Àwọn irinṣẹ́ tó nílò

8

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...