IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
The Folded-Steel Trowel: A V-Trough Blade From One Sheet
A thin flat trowel bends when you lever out a weed with tough roots; a thick one is heavy.
William B. Cleves of Binghamton, New York, received US 441,135, dated 25 November 1890 (filed 30 December 1889), for a trowel whose blade and shank are one sheet of metal "bent upon itself to form an angular longitudinally straight trough-shaped" blade. "Forming the blade and shank angularly, as described, greatly strengthens it and at the same time presents a long slim blade."
This rung works out how much stiffer a folded strip is than a flat one, then bends two strips of the same sheet, one flat and one folded, and loads them.
Àárín
About 2 hours
Ìlànà
1
1
Flat strip against folded strip
Flat strip against folded strip
Ń ṣí ìwé Jupyter…
2
2
Why shape beats thickness
Why shape beats thickness
The embedded blueprint shows how the shape of a section, not only its material, sets its stiffness. Cleves folds a sheet to get it.
3
3
Read US 441,135
Read US 441,135
"This invention has for its object to construct a trowel especially adapted for digging weeds and for cultivating purposes, wherein a strong blade is desired for prying and twisting."
"Forming the blade and shank angularly, as described, greatly strengthens it and at the same time presents a long slim blade."
The trowel "is especially adapted for digging plantains and other weeds having fibrous roots of great strength, and the particular form preferably employed increases the strength and decreases the weight."
4
4
Bend a flat and a folded strip
Bend a flat and a folded strip
Cut two identical strips from steel sheet. Leave one flat. Clamp the other along its middle in the vise and fold it to a V.
Clamp each at one end so the same length sticks out. Hang a weight from the free end and measure how far it drops with the ruler. Compare the two with the notebook's ratio.
Then dig out a deep-rooted weed with the garden trowel and note where it bends.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àwo irin1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ọ̀kọ̀ ọwọ́ ọgbà
Ìlàǹkàn irin
Ìdìmú Tábìlì
Òòlù
Ìwọ̀n
Ìdíwọ̀n5
5
A trowel that bends, twists or snaps
A trowel that bends, twists or snaps
Trowel troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**William B. Cleves** of Binghamton, Broome County, New York, filed US 441,135 on 30 December 1889; it is dated 25 November 1890. The shank is driven into the handle and held by a pin.
**Honest limits.** The notebook treats the fold as sharp and the strip as uniform, and compares bending along the blade only. The strip size and angles are examples. Your measured deflections are the measurement.
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.