IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
YourGrandma

Ṣẹ́dá nipasẹ̀

YourGrandma

30. Oṣù Kẹsàn 2026IS
28
0
0
0
0

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring

A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace. James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws. This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
Àárín
About 4 hours

Ìlànà

1

The ring's screws

Ń ṣí ìwé Jupyter…
2

A hinged squeezer before it

The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3

Read US 104,159

"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B." "This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4

Make the handles and set the bowl

**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B. **Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it. **Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle. **Press.** Screw a hardwood dome to the upper handle so it closes into the bowl. **Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Ìgò irinÌgò irin1 ẹyọ
Pátákó irin funfunPátákó irin funfun1 ẹyọ
Ohun ìdì paipu láìní òjéOhun ìdì paipu láìní òjé1 ẹyọ
Ohun ìyọ́Ohun ìyọ́1 ẹyọ
Pátákó Igi LílePátákó Igi Líle1 ẹyọ
Ìṣù Igi LíleÌṣù Igi Líle1 ẹyọ
Ìdìmú ẹnu-ọ̀nàÌdìmú ẹnu-ọ̀nà1 ẹyọ
Ìṣó igiÌṣó igi8 ẹyọ
Lẹ́mọ́ọ̀nùLẹ́mọ́ọ̀nù2 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

Ìlàǹkàn irinÌlàǹkàn irin
ÌṣóÌṣó
ÒòlùÒòlù
Irin ìsúdìIrin ìsúdì
Ayùn Ọwọ́Ayùn Ọwọ́
Ìdìpọ̀ àyà igiÌdìpọ̀ àyà igi
Ẹ̀rọ Ìlùkòkò AláìlókùnẸ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí ÌlùkòkòÀkójọ Orí Ìlùkòkò
AyùnAyùn
Ìṣù àwọn ohun ìyí skurúÌṣù àwọn ohun ìyí skurú
Ọ̀bẹ ilé ìdánáỌ̀bẹ ilé ìdáná
Ife ìmumiIfe ìmumi
Ìbọ̀wọ́ Iṣẹ́ AwọÌbọ̀wọ́ Iṣẹ́ Awọ
5

A bowl that rocks, leaks or will not come out

Ring-set lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened. **Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.

Àwọn ohun-èlò

9

Àwọn irinṣẹ́ tó nílò

13

Ìtọ́nisọ́nà yìí ń ṣe

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...