IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀

White Slip: Kaolin Stirred into Water and Sieved
Slip is clay made liquid with water. White slip, from white kaolin, covers a red clay body so it can be painted, joins handles and spouts to leather-hard ware, and is trailed or painted on as decoration. Soak the dry clay, stir it smooth, sieve it, and thin it until it pours like cream.
The picture: Miletus ware, a red body under white slip, painted blue.
Olùbẹ̀rẹ̀
A day
Ìlànà
1
1
Soak
Soak
Weigh the dry kaolin and sprinkle it onto water in a bucket. Leave it to soak overnight (ours).
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Amọ̀ kaolin2 kg
Omi2 lítàÀwọn irinṣẹ́ tí a nílò:
Òǹwọ̀n ìdọ́gba
Bàkẹ́tì irin oní ìdérí
Ìbòjú Eruku2
2
Stir smooth
Stir smooth
Stir it hard with a paddle until there are no lumps.
Àwọn irinṣẹ́ tí a nílò:
Ọ̀pá ìrú igi
Bàkẹ́tì irin oní ìdérí3
3
Sieve and thin
Sieve and thin
Push it through a fine sieve to take out grit, then add water a little at a time until it pours like cream. Keep it covered.
Àwọn irinṣẹ́ tí a nílò:
Àkójọ ajọ̀ (ihò onípele)
Bàkẹ́tì irin oní ìdérí
Ìgò Gílásì4
4
Clay and water
Clay and water
Ń ṣí ìwé Jupyter…
Àwọn irinṣẹ́ tó nílò
6- Àyè
- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.


