IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Woodblock Playing Cards
Woody

Ṣẹ́dá nipasẹ̀

Woody

27. Oṣù Keje 2026NO
38
0
0
0
0

Woodblock Playing Cards

Before printing reached books, it reached cards. Between roughly 1418 and 1450 professional card makers in Ulm, Nuremberg and Augsburg were cutting relief blocks and printing decks on pasteboard, and playing cards competed with devotional images as the commonest use of the woodcut in that period.

The economics are the whole story. A hand-painted deck was a luxury object; a cut block prints a full sheet of cards as fast as you can ink it, and from about 1450 the colour went on through stencils rather than by brush. Cutting the block is a day's work that pays for itself on the second deck.

This is a relief printing job: everything you do not carve away prints. The design goes onto the block reversed, because the block prints a mirror of itself.

Àárín
6 hours

Ìlànà

1

Plan the sheet, not the card

Lay out a grid of card outlines on paper — nine or twelve cards to a sheet, each 60 x 90 mm with 6 mm gaps. Early cards were printed many to a sheet and cut apart afterwards, purely for economy.

Àwọn irinṣẹ́ tí a nílò:

Measuring RulerMeasuring Ruler
2

Surface the block flat

Sand a basswood or lino block dead flat and check it against a straightedge. Any dip prints as a pale patch, and you cannot press it out later.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Basswood Carving BlockBasswood Carving Block1 ẹyọ

Àwọn irinṣẹ́ tí a nílò:

SandpaperSandpaper
3

Transfer the design reversed

Draw the design on thin paper, lay it face down on the block and rub it off, or trace it through carbon paper mirrored. Any text or number must be cut backwards or it prints backwards.

4

Ink the drawing in dark line

Go over the transferred lines with black ink so you can see what to keep. On the block, black is what survives; everything unmarked is waste.

5

Cut the outline with a V-tool

Cut a shallow V groove just outside every line you want to print, working around the line rather than into it. This isolates the printing lines before you clear anything.

Àwọn irinṣẹ́ tí a nílò:

Linoleum Carving Tool SetLinoleum Carving Tool Set
6

Clear the open areas with a gouge

Scoop out the large blank areas 2-3 mm deep with a U gouge. Shallow clearing picks up ink at the edges and prints grey smudges in the whites.

Àwọn irinṣẹ́ tí a nílò:

Wood GougeWood Gouge
7

Cut away from your hand, always

Keep the non-cutting hand behind the tool and clamp the block down. A gouge that slips travels the full length of the stroke.

8

Take a proof and correct

Ink the block and print one sheet on scrap. Broken lines, grey patches and missed clearings show up here and nowhere else. Recut and proof again.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Block Printing InkBlock Printing Ink10 ml
9

Roll a thin even film of ink

Roll the ink out on a slab until it hisses, then charge the block in two directions. Thick ink fills the fine lines and turns the outline into a blob.

10

Print onto pasteboard

Lay the pasteboard on the inked block, hold it still, and burnish the back firmly with a spoon or baren, working in overlapping circles. Lift one corner to check before pulling the sheet.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Card StockCard Stock1 ewé
11

Dry the sheets flat

Interleave the printed sheets with clean paper and dry them under light weight, 24 hours for oil-based ink.

12

Cut one stencil per colour

Cut a stencil for each colour from oiled card or thin sheet, one colour at a time, using a printed sheet as the pattern. From about 1450 this is how woodcuts of every kind were coloured.

Àwọn irinṣẹ́ tí a nílò:

Craft KnifeCraft Knife
Self-Healing Cutting MatSelf-Healing Cutting Mat
13

Register the stencil to the print

Cut two notches in every stencil that line up with the same two marks printed on the sheet. Without registration marks each colour lands slightly off and the deck looks drunk.

14

Brush colour through the stencil

Hold the stencil down flat and work colour through it with a stiff, nearly dry brush, sweeping across the openings. A wet brush creeps under the edge and blurs the shape.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Acrylic Paint SetAcrylic Paint Set1 ìtò

Àwọn irinṣẹ́ tí a nílò:

Paintbrush SetPaintbrush Set
15

Cut the cards apart

Cut the sheet down the gaps with a straightedge and knife. Cut the long axis first on every sheet so any drift stays consistent across the deck.

Àwọn irinṣẹ́ tí a nílò:

Metal Ruler (30cm)Metal Ruler (30cm)
16

Burnish and wax the faces

Burnish each card and rub a trace of beeswax over the face. Slick cards slide against each other; unwaxed pasteboard drags and will not shuffle.

Àwọn ohun èlò fún ìgbésẹ̀ yìí:

Beeswax PelletsBeeswax Pellets5 g
17

History & Context

Cards arrive, then printing arrives. Playing cards reached Europe in the late fourteenth century. Hand-painted decks survive from the fifteenth century as luxury objects, but no printed cards are known from before the 1420s. From roughly 1418 to 1450 professional card makers working in Ulm, Nuremberg and Augsburg were producing printed decks, and cards rivalled devotional prints as the most common product of the early woodcut.

Block, then engraving, then stencil. The images were drawn by hand, cut in relief on woodblocks, or — for the finest work — printed from copper engravings. Colour was applied by hand at first and by stencil from about 1450 onward. Each of those steps cut the labour per deck, and each one widened the market.

Pasteboard underneath. The stock was laminated pasteboard of three to six sheets. Stiffness let a card be dealt and shuffled; opacity stopped it being read from the back. The material is a blueprint in its own right and predates printing on it by a long way.

What we do not know. Surviving early decks are fragmentary — many known only from uncut proof sheets and from cards recycled as binding waste inside book covers, which is where a great deal of early printing survives at all. The suit systems now called German, Latin and French took shape over the fifteenth century, with the French pattern of hearts, tiles, clovers and pikes appearing around 1480 and winning out largely because its flat single-colour shapes could be stencilled in a couple of strokes. The design that survived was the one that was cheapest to colour.

Diderot, and a caution. Much of the detailed technical description of card making that gets quoted for the medieval period actually comes from Diderot's Encyclopédie in the eighteenth century. It describes a mature trade three centuries later than the first printed cards, and should not be read back onto them as if it were contemporary evidence.

Àwọn ohun-èlò

5

Àwọn irinṣẹ́ tó nílò

8

Àwọn Ohun Èlò Ìtọ́nisọ́nà Tí A So Pọ̀

Blueprint tó jọra

Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà

CC0 Àgbègbè Gbogbogbò

Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.

Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.

Ìfọ̀rọ̀wérọ̀

(0)

Wọlé láti dara pọ̀ mọ́ ìfọ̀rọ̀wérọ̀

Ń gbé àwọn ọ̀rọ̀ wọlé...