IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Zinc Powder: Zinc Crushed Hot, Just Below Melting
Zinc has an odd temper: brittle cold, soft enough to roll at 100 to 150 °C, and above 200 °C so tender that it crushes to powder. Thorpe (1913): zinc dust can be made by crushing the metal in a mortar at a heat somewhat below its melting point of 420 °C. Work hot with leather gloves.
The picture: our own drawing.
Olùbẹ̀rẹ̀
Half a day
Ìlànà
1
1
Cut the zinc small
Cut the zinc small
Saw 300 g of zinc into small pieces.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ìṣù Sínkì300 gÀwọn irinṣẹ́ tí a nílò:
Ayùn Irin
Òǹwọ̀n ìdọ́gba2
2
Heat to just below melting
Heat to just below melting
Heat the pieces in an iron pot above 200 °C but below 420 °C, where zinc melts. Check with a pyrometer.
Àwọn irinṣẹ́ tí a nílò:
Ìkòkò irin dídà
Àdògán èédú
Pirómítà
Ìbọ̀wọ́ Awọ3
3
Crush in the mortar
Crush in the mortar
Tip a few hot pieces at a time into the mortar and crush them. Hot zinc breaks to powder; reheat what is left whole.
Àwọn irinṣẹ́ tí a nílò:
Odó àti Ọmọ OdóÌbọ̀wọ́ Awọ4
4
Sieve and store
Sieve and store
Sieve the cooled powder, return the coarse bits for another crushing, and keep the powder in a closed jar.
Àwọn irinṣẹ́ tí a nílò:
Ohun Ìsẹ́ Kékeré
Ìgò Gílásì OnídìíÀwọn irinṣẹ́ tó nílò
9- Àyè
- Àyè
- Àyè
- Àyè
Ìtọ́nisọ́nà yìí ń ṣe
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.