Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Acetoacetanilide: Ketene Dimer Combined with Aniline (Thorpe 1912)
The ketene dimer combines with aniline to give acetoacetanilide.
Source: Thorpe, Dictionary of Applied Chemistry vol. 3 (1912), Ketenes. Unknown: the amounts and the conditions. Thorpe states only that the two combine. The isolation is ours, after Organic Syntheses Coll. Vol. 3, p. 10 (1955). Picture drawn by Youblob.
Abantado
1 day
Mga Tagubilin
1
1
Combine the dimer with aniline
Combine the dimer with aniline
Bring the ketene dimer together with aniline: they combine to form acetoacetanilide. Unknown: the amounts and conditions. Ours: gloves and a fume hood.
Mga materyales para sa hakbang na ito:
Dimer ng ketene1 as required
Aniline1 as requiredMga kailangang kasangkapan:
Prasko na bilog ang ilalim
Panghalong Salamin
Kabinet ng usok (may tubo)
Gwantes na Nitrile
Salamin Laban sa Tilamsik ng Kemikal2
2
Isolate the acetoacetanilide
Isolate the acetoacetanilide
Ours, after Organic Syntheses Coll. Vol. 3, p. 10 (1955): dissolve the crude product in hot 50 % aqueous ethanol (they used 500 ml for the product of 0.5 mole aniline), cool to 0 °C and filter. Adding water to the mother liquor (250 ml) and cooling again gives a second crop. It melts at 82-83.5 °C; recrystallised from 50 % ethanol, at 84-85 °C.
Mga kailangang kasangkapan:
Etanol - antas laboratoryo, 95 %
Tubig
Pang-init na Plato
Embudong Büchner (porselana)
Gwantes na NitrileMga Kinakailangang Kasangkapan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.


