Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Acrylic Block: Methyl Methacrylate Syrup Cast in Layers between Glass
A thick acrylic block cannot be cast flawless in one pour. Tattersall (ICI, US 2,071,907, 1937) built it up in layers: pour 1/2 inch of syrup on a level glass plate, let it set for a day at room temperature, pour the next 1/2 inch on top, cover with a second glass plate, wait another day, then heat the sandwich at 80 °C. Each 1/2 inch layer shrinks to about 1/3 inch. The glass gives both faces a finished polish with no grinding.
The picture: our diagram.
Katamtaman
3 days
Mga Tagubilin
1
1
Level the bottom plate
Level the bottom plate
Set a glass plate on a ledge in a wooden frame, on a body of plaster of Paris, and level it carefully. The example sheet was 10 by 18 inches.
Mga kailangang kasangkapan:
Salaming lapad
Kuwadrong kahoy
Yesong Plaster of Paris
Antas na May Burbuha2
2
Pour the first 1/2 inch
Pour the first 1/2 inch
Pour room-temperature syrup 1/2 inch deep (about 1.5 litres for 10 by 18 inches; our figure). Cover against dust, but do not put the top plate on yet. Leave 24 hours at about 20 °C.
Mga materyales para sa hakbang na ito:
Sirup ng methyl methacrylate3 lMga kailangang kasangkapan:
Gwantes na goma
Termometrong Panlaboratoryo3
3
Pour the next layer and cover
Pour the next layer and cover
Pour a second 1/2 inch layer on the first. Lower the top glass plate onto it so it rests on the syrup and keeps pressing on it. Leave another 24 hours at about 20 °C. For a thicker block repeat the layers, a day apart, and put the plate on the last one.
Mga kailangang kasangkapan:
Salaming lapad4
4
Heat at 80 °C
Heat at 80 °C
Take the glass sandwich out of the frame and heat it for three hours at 80 °C to finish the polymerisation.
Mga kailangang kasangkapan:
Hurnong pantuyoTermometrong Panlaboratoryo
Guwantes na Matibay sa Init5
5
Spring off the glass
Spring off the glass
Spring the glass plates off the block with a knife blade. Both faces come out smooth and polished.
Mga kailangang kasangkapan:
Kutsilyong Pang-arteGwantes na gomaMga Materyales
1- Placeholder
Mga Kinakailangang Kasangkapan
9- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.