Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Acrylic Pellets: Methyl Methacrylate Stirred into Beads in Gelatine Water at 75 °C (Crawford & McGrath, ICI, US 2,108,044)
Stirred hard enough in water with a little gelatine, methyl methacrylate breaks into droplets that harden into separate beads of acrylic instead of one solid lump. ICI's beads settle out, wash easily and go straight to the moulding press.
Result: hard acrylic granules, used as moulding and extrusion pellets (they are beads, not cut pellets).
Source: Crawford & McGrath, US 2,108,044 (ICI, 1938), Examples 5 and 6. Picture drawn by Youblob.
Abantado
1 day
Mga Tagubilin
1
1
Dissolve 1 part benzoyl peroxide in 100 parts monomer
Dissolve 1 part benzoyl peroxide in 100 parts monomer
Dissolve 1 part by weight of benzoyl peroxide in 100 parts of methyl methacrylate.
Mga materyales para sa hakbang na ito:
Methyl Methacrylate100 parts by weight
Benzoyl peroxide1 part by weightMga kailangang kasangkapan:
Timbangang panimbang2
2
Mix with 200 parts of water holding 2 parts gelatine
Mix with 200 parts of water holding 2 parts gelatine
Mix it with 200 parts of water containing 2 parts of gelatine in solution (Example 6; Example 5 uses a soluble starch instead).
Mga kailangang kasangkapan:
Pulbos na gelatin
Tubig
Reaktor ng polimerisasyon na may jacket3
3
Stir at 1000 rpm and blow in steam to 75 °C
Stir at 1000 rpm and blow in steam to 75 °C
Stir at 1000 rpm and blow steam into the stirred mixture to bring it to 75 °C, and hold it there. After about 115 minutes the temperature starts to rise by itself: shut off the steam.
Mga kailangang kasangkapan:
Panghalo
Boiler ng singaw
Termometrong Panlaboratoryo4
4
At the 82 °C peak, cool to 60 °C with cold water
At the 82 °C peak, cool to 60 °C with cold water
When the temperature peaks at 82 °C, cool the mixture to 60 °C by adding cold water.
Mga kailangang kasangkapan:
Tubig5
5
Centrifuge, wash and dry at 100 °C
Centrifuge, wash and dry at 100 °C
Separate the granules in a centrifuge and wash them with 1 % hydrochloric acid, water, 2 % ammonia solution, and repeatedly with water. Dry them at 100 °C.
Mga kailangang kasangkapan:
Basket centrifuge
Hydrochloric acid
Solusyon ng ammonia - manipis
Hurnong pantuyoMga Materyales
2- 100 parts by weightPlaceholder
- 1 part by weightPlaceholder
Mga Kinakailangang Kasangkapan
11- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.