Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)
Charlie

Nilikha ni

Charlie

1. Nobyembre 2026DE
3
0
0
0
0

Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)

Air is nearly 1 % argon. Red-hot calcium carbide with a little calcium chloride swallows both the oxygen and the nitrogen; argon, which combines with nothing, passes straight through. Result: about 11 litres of argon from 7 kg of carbide in two days. It still holds traces of neon, krypton and xenon (0.25 %, mostly neon). Source: Thorpe, Dictionary of Applied Chemistry vol. 1 (1912), p. 291, after Fischer and Ringe (Ber. 41, 2017). Not given: the vessel, the air volume, and how the water and carbon dioxide are taken out. Picture drawn by Youblob.
Abantado
2 days

Mga Tagubilin

1

Mix the absorbent

Mix calcium carbide (90 %) with calcium chloride (10 %): 7 kg carbide takes about 0.78 kg chloride (our arithmetic). Fill a tube with it. Ours: a porcelain tube in a tube furnace.

Mga kailangang kasangkapan:

Carbide ng kaltsiyoCarbide ng kaltsiyo
Calcium chlorideCalcium chloride
Tubong PorselanaTubong Porselana
Hurnong TuboHurnong Tubo
2

Drive off volatile matter

Heat the mixture under reduced pressure first, to drive off anything volatile.

Mga kailangang kasangkapan:

Bombang panghigop ng hanginBombang panghigop ng hangin
Hurnong TuboHurnong Tubo
3

Lead air over it at 800 °C

Hold the mixture at 800 °C and lead air over it slowly. The oxygen and nitrogen are taken up; what comes out is mostly argon. Ours: draw the air through with an aspirator.

Mga materyales para sa hakbang na ito:

Hangin ng atmospera - DaigdigHangin ng atmospera - Daigdig1 as required

Mga kailangang kasangkapan:

PirometroPirometro
AspiratorAspirator
Hurnong TuboHurnong Tubo
4

Burn the traces over hot copper oxide

Lead the gas over hot copper oxide. It burns any hydrogen, hydrocarbons and carbon monoxide.

Mga kailangang kasangkapan:

Copper OxideCopper Oxide
Tubong PorselanaTubong Porselana
Hurnong TuboHurnong Tubo
5

Take out water and carbon dioxide

Remove the water vapour and carbon dioxide. Ours: soda lime for the carbon dioxide, then phosphorus pentoxide for the water.

Mga kailangang kasangkapan:

Apog na may soda (sumisipsip ng CO2)Apog na may soda (sumisipsip ng CO2)
Phosphorus PentoxidePhosphorus Pentoxide
Botelyang Panghugas ng GasBotelyang Panghugas ng Gas
6

Collect the argon

Collect the gas. Expect about 11 litres in two days from 7 kg of carbide. Ours: over water in gas jars.

Mga kailangang kasangkapan:

Pneumatic Trough na may mga Gas JarPneumatic Trough na may mga Gas Jar

Mga Materyales

1

Mga Kinakailangang Kasangkapan

12

Ang blueprint na ito ay gumagawa ng

Kaugnay na Blueprint

Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...