SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Boric Oxide: Boric Acid Heated Slowly Past 300 °C
Boric oxide, a main part of borosilicate glass, is boric acid with its water driven off. Heated, boric acid gives off steam at about 170 °C and turns to metaboric acid; above 300 °C it loses the rest and leaves a clear glassy oxide. Heat it slowly, or it froths and gums.
The picture: boron trioxide in a vial.
Katamtaman
A day
Mga Tagubilin
1
1
First heat
First heat
Weigh the boric acid into an iron crucible and warm it gently to about 170 °C, checked with the pyrometer, stirring, while it gives off steam.
Mga materyales para sa hakbang na ito:
Boric acid200 gMga kailangang kasangkapan:
Timbangang panimbang
Krisol na bakal
Pugon na Uling
Uling
Pirometro
Bilog na baras na bakal
Mga guwantes sa paghihinang
Salaming pangkaligtasan2
2
Over 300 °C
Over 300 °C
Raise the heat slowly above 300 °C. More steam comes off; go slowly so it does not froth up and gum. Hold it until no more steam rises and it settles to a clear glass.
Mga kailangang kasangkapan:
Pugon na Uling
Pirometro
Bilog na baras na bakal
Sipit ng Krisol
Mga guwantes sa paghihinang
Salaming pangkaligtasan3
3
Crush and store
Crush and store
Let it cool, break the glassy cake out, crush it to powder, weigh it and keep it in a closed jar (ours).
Mga kailangang kasangkapan:
Almires at Panghalo
Timbangang panimbang
Garapong Salamin
Maskara Laban sa Alikabok4
4
Oxide from your acid
Oxide from your acid
Naglo-load ng Jupyter notebook…
Mga Materyales
1- 200 gPlaceholder
Mga Kinakailangang Kasangkapan
12- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

