SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Chartwork: True, Magnetic and Compass
Mark

Nilikha ni

Mark

23. Setyembre 2026FI
38
0
0
0
0

Chartwork: True, Magnetic and Compass

There are three different norths, and a navigator has to move between them constantly. The chart is drawn on TRUE north. The compass needle points at MAGNETIC north, which is somewhere else and moves year by year. And the compass in the boat points somewhere else again, because the boat's own iron and electronics pull it. Those two offsets are called VARIATION and DEVIATION. They are not errors to be lamented — they are known quantities to be applied, and applying them in the right direction is the single most practised skill in coastal navigation, because getting the sign wrong puts you twice the offset out rather than nothing. This rung is the arithmetic that connects the chart to the thing in front of the helm, and the method for measuring your own boat's deviation — which no table can give you, because it is a property of that hull.
Katamtaman
1 day

Mga Tagubilin

1

Read the variation off the chart, for this year

The compass rose on the chart states the variation at a stated date, with an annual rate of change. Apply the years elapsed. Variation is geographic: it differs from place to place and drifts with time as the earth's field moves. On an old chart the stated figure can be several degrees stale, which at ten miles is a mile of error. Write the variation you are using on the chart in pencil, with the year, so the assumption is visible rather than remembered.
2

Swing the boat to find your own deviation

Line up two fixed marks whose true bearing you know — a transit — and steer the boat slowly through a full circle, reading the steering compass as the transit comes on. Do it on eight or twelve headings. The difference between what the compass reads and the known bearing is the deviation ON THAT HEADING. It is not a single number: it changes around the compass, typically as a smooth curve with two maxima. Tabulate it, and keep the card where the helm can see it.

Mga kailangang kasangkapan:

KompasKompas
BinokularBinokular
3

Learn one direction rule and use it always

Going from the chart to the helm — TRUE to COMPASS — you ADD westerly variation and deviation. Going from the compass to the chart you subtract them. The old mnemonic is 'Error West, Compass Best; Error East, Compass Least'. Choose one mnemonic and never mix it with another, because the classic disaster is applying a correction the wrong way and ending up twice the error out. Write the working down every time: True, Variation, Magnetic, Deviation, Compass, in that order, in a column.
4

Keep iron away from the compass, and prove it

Note what is near the compass — a phone, a torch, a tool, a loudspeaker, an engine — and test each one by bringing it up while watching the card. A mobile phone laid beside a compass can swing it twenty degrees, and nothing about the compass will look wrong. Deviation measured with a tidy boat is not the deviation you have with a toolbag on the seat. Mark a keep-clear zone and treat any change in the boat's metal as a reason to swing it again.

Mga kailangang kasangkapan:

KompasKompas
5

The conversions, and what a sign error costs

Naglo-load ng Jupyter notebook…
6

Write the working on the chart, not in your head

Set out every conversion as a labelled column in the log, and pencil the final course on the chart beside the line. Mental arithmetic in a seaway is where sign errors live. A written column can be checked by someone else, and it can be checked by you in ten minutes when the depth is not what you expected. It costs fifteen seconds and it is the cheapest insurance in the boat.

Mga Kinakailangang Kasangkapan

2
  • Placeholder
  • Placeholder

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...