Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Cracked C4 Cut: Cracking-Still Gas Liquefied and Split in Four Columns at 200 psi (Eastman, Texas Co., US 2,014,724)
The gas from a cracking still is a mixture of light hydrocarbons. Compress it, chill it until it liquefies, and run it through four columns in turn: each column sends one group off its top, and the fourth gives the butanes and butylenes together, the C4 cut.
Result: a liquefied butane-butylene cut. Eastman does not give its composition.
Source: Eastman, US 2,014,724 (1935). Not given: the cut's make-up, how the impurities are removed, the refrigerant. The gas from Burton's still is used here as the same kind of cracking-still gas. Extremely flammable gases under pressure. Picture drawn by Youblob.
Dalubhasa
1 day
Mga Tagubilin
1
1
Clean the cracking-still gas
Clean the cracking-still gas
Take the gas from a cracking still, preferably after its gasoline has been separated and impurities such as hydrogen sulfide, carbon dioxide and water removed. Eastman does not say how they are removed.
Mga materyales para sa hakbang na ito:
Gas mula sa pag-crack1 as requiredMga kailangang kasangkapan:
Tangke ng gas na may presyon2
2
Compress and chill it until it liquefies
Compress and chill it until it liquefies
Compress the gas, then cool it far enough that it liquefies almost completely.
Mga kailangang kasangkapan:
Kompresor ng gas
Kolum ng cryogenic distillation
Panukat ng Diin3
3
Take off methane and hydrogen, then the C2s
Take off methane and hydrogen, then the C2s
Run the liquid through a series of fractionating columns at about 200 lbs per square inch. Methane and hydrogen escape from the top of the first column, at about -100 °F; ethylene and ethane from the second, at about -25 °F. Eastman burns the methane and hydrogen as fuel in his cracking furnaces.
Mga kailangang kasangkapan:
Kolum ng cryogenic distillationPanukat ng Diin4
4
Take off propane and propylene
Take off propane and propylene
Propane and propylene leave the top of the third column, at about +100 °F.
Mga kailangang kasangkapan:
Alambike ng paghati-hatiPanukat ng Diin5
5
Take the butanes and butylenes from the fourth column
Take the butanes and butylenes from the fourth column
The butane and butylene come off the top of the fourth column, at about +200 °F under the same pressure. This is the C4 cut. Ours: condense it into pressure cylinders.
Mga kailangang kasangkapan:
Alambike ng paghati-hatiPanukat ng DiinTangke ng gas na may presyonMga Materyales
1- 1 as requiredPlaceholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.