Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE

Douglas Fir Timber Beam: a Straight Log Hewn Square and Seasoned
Douglas fir is strong, hard and durable, the wood of timber frames, trusses and heavy timber structures, and it comes in long lengths. Snap chalk lines on a straight log, hew it square with axe and adze, seal the ends and let it season under cover.
The picture: our diagram, the square marked on the log end and the hewn beam.
Katamtaman
Two days, then seasoning
Mga Tagubilin
1
1
Cut and mark
Cut and mark
Crosscut the straight log to length. Draw the square on both ends and snap chalk lines along the log between the corners.
Mga materyales para sa hakbang na ito:
Troso ng Douglas fir (Pseudotsuga menziesii)1 pirasoMga kailangang kasangkapan:
Lagaring pantabas
Panukat na Tape
Eskuwalang de-tokod
Tali ng tisa
Guwantes na Katad Pangtrabaho2
2
Hew
Hew
Score down to the line every hand's breadth with the axe, knock off the chunks, then hew the face flat to the line with the adze. Turn the log and repeat on each face.
Mga kailangang kasangkapan:
Palakol
Daras
Tali ng tisa
Guwantes na Katad Pangtrabaho3
3
Season
Season
Seal the ends and stack the beam on stickers off the ground under cover until it has dried.
Mga kailangang kasangkapan:
Pansara ng dulo (waks na parapina)
Panipis na kahoy (pang-agwat sa pagpapatuyo)
Pantakip na trapal4
4
Largest square from your log
Largest square from your log
Naglo-load ng Jupyter notebook…
Mga Materyales
1- Placeholder
Mga Kinakailangang Kasangkapan
10- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.


