SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Ease: A Garment Is Bigger Than the Body, and by How Much Is a Decision
A garment cut to exactly the body's measurements cannot be worn. There would be no room to breathe, to sit down, or to raise an arm — so every garment is cut larger, and the amount is called EASE.
There are two kinds and they are constantly confused. WEARING ease is the minimum extra needed for the body to move: a few centimetres at the bust, more at the hip. DESIGN ease is everything beyond that, and it is what makes a garment fitted, relaxed or oversized.
Which means "it does not fit" usually means "it has the wrong ease", and that is a far more tractable problem. A pattern's ease can be read off, compared with the body, and changed before a single piece is cut.
Katamtaman
3 hours
Mga Tagubilin
1
1
Measure the body properly, and write it down
Measure the body properly, and write it down
Measure over the underwear that will be worn, with the tape snug but not pulled tight, and level all the way round — a tape that rides up at the back gives a measurement that is too small.
Take each measurement twice and take the second one if they differ, because the first is usually taken with the tape not yet settled. That is the repeat-and-look-at-the-spread rung: one reading is not a measurement.
Write them down with the date. Bodies change, and a pattern altered to measurements from three years ago fits a person who no longer exists. Dated measurements also let you see which way things are moving.
Mga kailangang kasangkapan:
Panukat na Tape2
2
Read the ease out of the pattern, and choose it
Read the ease out of the pattern, and choose it
Naglo-load ng Jupyter notebook…
Mga materyales para sa hakbang na ito:
Papel1 pirasoMga kailangang kasangkapan:
Panukat na Tape
Desktop na Kompyuter
Ruler3
3
Make a toile before cutting the good cloth
Make a toile before cutting the good cloth
A TOILE (or muslin) is a trial garment in cheap cloth, made to check the fit before the real fabric is touched. It costs an afternoon and a few metres of calico and it is the single highest-value habit in garment making.
Sew it with long stitches and no finishing — it exists to be tried on, marked and taken apart. Mark corrections on it directly with a pen while it is being worn.
Then unpick it and use the pieces as the corrected pattern, or transfer the marks back to the paper. Either way the toile becomes the record, and the good cloth is cut once from a pattern that is already known to fit.
Mga materyales para sa hakbang na ito:
Telang Muslin na Bulak2 metre
Sinulid na Bulak1 pirasoMga kailangang kasangkapan:
Makinang panahi
Aspile sa pananahi
Tisa ng sastre
Pantastas ng tahi4
4
Change one thing at a time when altering
Change one thing at a time when altering
Alter one aspect, try it on, then alter the next. Take in the side seams AND shorten the bodice AND move the shoulder in one round and you cannot tell which change helped or which caused the new problem.
That is the change-one-thing-at-a-time rung applied to a body, and it matters more here than almost anywhere because the pieces interact — shortening a bodice moves the waist, which changes where the hip measurement falls.
Work from the top down and from the largest problem to the smallest. Shoulders and neckline first, because everything hangs from them; hems last, because the hem's position depends on every alteration above it.
Mga materyales para sa hakbang na ito:
Telang Muslin na Bulak1 metreMga kailangang kasangkapan:
Aspile sa pananahiTisa ng sastrePanukat na TapeMga Materyales
3- 1 pirasoPlaceholder
- 3 metrePlaceholder
- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
7- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.